The source we consulted says that the standard tennis ball is between 65.41 mm
and 68.58 mm in diameter. The source does not specify whether or not the standard
diameter includes the fuzz.
So the smallest acceptable tennis ball is 65.41 mm in diameter.
1 inch = 25.4 mm. 65.41/25.4 = 2.575 inches. It looks like the answer is "no",
unless the ball were to be deflated and stuffed into the pipe.
The radius is half of the 4 inch diameter. Therefore, the radius is 2 inches.
The answer will depend on whether it is a 2 inch pipe or a 2 cm pipe or a 2 foot pipe or whatever.The answer will depend on whether it is a 2 inch pipe or a 2 cm pipe or a 2 foot pipe or whatever.The answer will depend on whether it is a 2 inch pipe or a 2 cm pipe or a 2 foot pipe or whatever.The answer will depend on whether it is a 2 inch pipe or a 2 cm pipe or a 2 foot pipe or whatever.
The take-off for a standard radius 90 is one and one half the diameter of the pipe. Example: 6 inch 90 has a take- off of 9 inches. The take-off for short radius 90 would be the dia. of the pipe. Long radius 90 is 2 times the pipe diameter.
Insufficient information, one needs to know the pressure of the water entering the pipe, the relative heights of both ends the pipe, the pressure of the water at the discharge of the pipe, the geometry of the pipe including the number and types of turns, and the pipe material or internal friction coefficient. Then you can calculate the flow.
The answer depends on the cross section of the pipe and its length.
A ball machine is a machine which shoots tennis balls out of a pipe.
1/2 inch + 2*thickness of the pipe.
Given enough time the entire ocean could be pumped through a half-inch pipe.
Water flow rate half inch PVC pipe 65 psi?
use tennis ball and pipe cleaner
water line? half inch or three quarters
In the USA, 15mm is half-inch, and 22mm is three-quarters inch. Lengths of pipe nipples in these sizes range from one and a quarter/one and a half, to six inches, in half-inch increments.
The radius is half of the 4 inch diameter. Therefore, the radius is 2 inches.
i believe the pressure does not change but the volume of water you will be able to use will be less
10gpm
One and a half or two inch is usual.
250 PSI WELDED