NO. If it is a 1/2 ton then it MUST have the 4L60E put back in it. The 3/4 tons MUST have the 4L80E put in them.
Turbo 350 or 400 is the short answer. There are a myriad of trannies that will work with little or no modification Mike
yes a 350 turbo converter will fit a 400 turbo and vice versa
yes but the 350 turbo like the 400 turbo are vacuum run so you will need to tie into a vacuum line i put a turbo hydromatic 400 in my 1990 silverado that originally had a 700r4 it sucks not having overdrive but it will work also the output shaft is bigger so i needed a compatible transfer case in a 2wd this may not be a problem
Yes
NO.. It will not work.
No
If it's a 1/2 ton, It will be the 350 turbo. The 3/4 tons used the 400 turbo.
1/2 tons used the350 turbo. The 3/4 tons used the 400 turbo
The 1/2 tons used the 350 Turbo and the 3/4 tons and up used the 400 turbo.
If your speaking of the vacuum modulator for the transmission, they no longer use them on the transmissions with overdrive and electronics. The powerglide, turbo 350 and turbo 400 used to use them.
NO it will not work. YOU MUST PUT THE 4L60E 4x4 transmission BACK IN IT.DUE TO THE COMPUTER SYSTEM IN THE TRUCK.
stock they are 160hp and 400 ft.lbs torque.