0
What else can I help you with?
Ford expedition air bag code 33?
Code: 33 Passenger Air Bag Circuit Resistance High What year of Expedition ? if older model (I think 2002 or 2003 or older) is passenger side airbag circuit malfunctioned. if newer than 2002 or 2003 (Sorry not sure exact year they changed code), it means Driver side pretentionor (Seat belt retractor). There is small bomb in seat belt Retractor to make passenger tight fit to seat when airbag deploy. if something is wrong with seat belt retractor bomb (pretensionor), airbag itself may may not work to avoid injury by airbag.
Describe how seat belt tensioners work in conjunction with the airbag?
- Seat belts, also known as safety belts, are a safety feature that secures the passenger in the vehicle seat in case of an accident. Seat belts are part of the occupant restraint system that helps to avoid harmful movement of the passengers, which could lead to injuries and also protects the occupants from being ejected from the vehicle. - Seat belt tensioner work in conjuction with the airbag help to optimize the performance of the airbag systems. Maintaining proper occupant position reduces the amount of work the airbags must perform, and thus increases the level of protection provided by the SRS system. Keeping the occupant in the proper position minimizes injury due to the rapid inflation of the airbags.
Can you remove an airbag if you install seat belt harnesses?
Yes, you can remove an airbag if you install seat belt harnesses, but it's important to understand the implications for safety and legality. Airbags are designed to work in conjunction with seat belts, and removing them may increase the risk of injury in an accident. Additionally, modifying a vehicle's safety features can violate regulations or insurance policies, so it's crucial to check local laws and consult with a professional before making such changes.
What to do if passenger seat does not always heat up?
The seat belt has to be ingaged for heater to work. The seatbelt has to be ingaged to work
How do you harness 3 in 1 car seat?
there are seat belt extenders that might work
Will air bag work if seat belt is not fastened?
Yes.
Where is airbag module located on 2003 Mercedes Vito?
The airbag module on a 2003 Mercedes Vito is typically located underneath the front passenger seat. To access it, you may need to remove the seat, as the module is mounted on the vehicle's floor. Always ensure the battery is disconnected before attempting to work on the airbag system for safety reasons.
Why doesn't my seat belt alarm work?
depending on the vehicle, some seat belt alarms can be disabled theu settings in the vehicle,check owneres manuel for instructions how to do this or to undoe this
How do you get rid of the airbag warning light on a Ford Mondeo?
if the airbag warning light comes on it means most likely that your airbag system is faulty, it should be taken to a professional to be sorted out but often on mondeos it can be a yellow plug under the seat that needs removing being wiped/cleaned and plugged back in which can solve the problem, try this on both drivers seat and passengers seat, if it doesnt work take it to a dealer.
Are seat belts effective at low speeds?
no if you have the type of seat belt that you can keep pulling. They only work at higher speeds.
How do you Remove rear seat belt from vauxhall astra?
I can assume that you are talkin about centre belt cause they seem to be a big problem. First of all before you go there , there is a cable that runs from the seat belt unit to the catch that your seat clips into when you have laid it down. You will probably find that the seat catch is not engaged properly which stops a cable from retracting and allowing the seat belt mechanism to release. Try lubricating the latch at the rear of the seat and also slamming. This is a safety device so if your seat is not clipped in properly you cannot pull out seat belt. If this doesn't work - Unclip the the rear protector on the rear of your seat and you will see along the edge of the seat near the bottom ,where you undo the fabric from the seat . Fold the fabric at the top away after unclipping the plastic insert were the belt goes into the seat, You will see some screws holding a steel plate over the belt. Remove the plate - Look on the back of the seat on the steel part and there is a bolt holding seat belt in place , Undo this and abstract seat belt from between foam and release cable from seat belt..
How do i disable the seat belt chime on my 2017 dodge journey?
To disable the seat belt chime on a 2017 Dodge Journey, you typically need to follow a specific sequence with the ignition and seat belt. Start with the ignition off, then buckle and unbuckle the seat belt three times, ending with the seat belt unbuckled. Turn the ignition on and off again to complete the process. If this method doesn't work, consult the owner's manual for additional instructions specific to your vehicle.
