This is kind of a tricky one. I didn't do it with an Edelbrock carb.....it was a Holley. But here's some things to try. I bought a universal drop chrome air cleaner that would clear the Holley fuel bowls. I cut the bottom out of the original air cleaner base, leaving about 1/2" around the edge. I then cut the universal one to fit in it, just til it overlaps the original. You can weld or pop rivet the two together. Do some measuring. Make sure you get the height you need for the shaker to fit. You may or may not need a drop style air cleaner. When done, all your shaker parts still function and fit as original. Good luck.
I am assuming you mean an Olds 350. Yes...for a direct fit with no modifications you will have to use the stock intake manifold, Q-jet carb, air cleaner base and shaker scoop from a T/A that was originally equipped with the Olds 403. After my shaker scoop was stolen, I discovered the hard and expensive way that their are at least 3 different shaker/air cleaner combos to achieve the correct height for the different engines available in these cars.
The address of the Shaker Society is: 707 Shaker Rd, New Gloucester, ME 04260
the shaker rules are that they all have to be the same
Tom Shaker is 6'.
The address of the Shaker Historical Museum is: 16740 S Park Blvd, Shaker Hts, OH 44120-1641
The address of the Shaker Historical Museum is: 16740 South Park Blvd., Shaker Heights, OH 44120-1641
The address of the Shaker Heights Public Library is: 16500 Van Aken Boulevard, Shaker Heights, 44120 5318
Shaker Run was created in 1985.
The population of Buckeye-Shaker is 16,063.
Soul Shaker was created in 2005.
Errol Shaker is 187 cm.
Shaker Verlag was created in 1986.