0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the maximum bandwidth of SATA?
Speed of sata 1 is 1.5 Gbps Speed of sata 2 is 3 Gbps
How do you run an SATA hard drive on a computer that's based on PATA?
Sata is a different kind of disk. If your computer onlyhas a PATA drive connection you won't be able to run SATA. You should be able to find a SATA disk controller or upgrade your motherboard.
How to connect hard disk with sata 3 to sata 1 port?
SATA 3 is backwards compatible, it means you connect it the same way as SATA 1.
What does this mean The motherboard M.2 slot 1 shares bandwidth with SATA 6.0 Gbs ports. When the M.2 slot is populated two SATA 6.0 Gbs ports are disabled.?
means the m.2 will get all of the power that the two sata 5 and 6 would get. it also means that the pathway the sata drives use is the same as the m.2.
Can I connect 2 SATA hard drives to 2 SATA connectors and DVD burnner to IDE connector on the same mother board?
Yes. Assuming that your mobo has at least 2 SATA ports, 1 IDE port, and appropriate power cables are available from the power supply.
What is the difference between SATA 1 and SATA 3?
The main difference is transfer speed, if you for instance a new solid state drive it a sat 1 port it will be limited in speed, still fast but not the maximum performance you could get out of it, For a conventional Hard drive you won't notice the difference though. All sata devices are backward compatible so theres no worries there
What are the three types of hard drives?
1.pata 2.sata 3.scsi
Just replaced a defective secondary 160gb sata hard drive with a 200gb sata hard drive the new hard drive is not functioning I used the new cables that came with the one what is the problem?
You should check the exact type of your SATA drives, and what cables they require, on their website: SATA drives come as SATA-1 and SATA-2, and also as E-SATA [external SATA], I believe. The cables may be different, check it out on Wiki or your mfrs site. cheers!
What type of sata port is on a Foxconn C51GU01 Motherboard?
Most likely it's 2 SATA 2 ports.
Does windows 2000 support sata drives?
Windows 2000 has no native support for SATA drives. If you have a slipstreamed CD with service pack 4, and the drivers for the SATA controller, you can install it. If not, you will have to run the SATA controller in emulation mode, so that Windows 2000 thinks that it is an IDE drive.
Your mb crashed need to replace you have an ide slot to run dvdrw CD-RW and 2 sata slots to run two hard drives you are considering mbs with 3 sata and 1 pata can you transfer ide drives to the new mb?
Answer:It looks like what you really need to know is: PATA, is the same as IDE.We had so many standards on IDE: ATA, Ultra ATA, Ultra66(wed roped the ATA), And on, and on. The new tech is SATA, which is just Serial ATA. Since the old technology is all Parallel, we just refer the old IDE as P ATA now. If you have a PATA, you have an IDE, which will run 2 IDE devices of you set the jumpers correctly.So yes, but only 2.
Is 2.5inch hard drive sata 3.0 backward compatible with sata 1.5?
Yes. SATA drives and controllers are backwards and forwards-compatible. However, a 3.0 drive attached to a 1.5 controller will only run at 1.5 speed.
