Yes, absolutely. Any television with RCA style inputs can be used with this adapter, including LCD's, Plasma, projections, and even CRT.
back pannel connector
ambot
The panel involves a motherboard that is connected by pins to the FP connector. The motherboard uses a standard FP connector, therefore, easy to figure out.
You'll need to first remove the door panel, then unplug the connector from the back of the switch panel. If you want to replace the panel, you simply push the entire panel towards the top of the door and it will pop out of the snap retainers. If you have power side view mirrors, you may want to unplug that connector as well as the speaker connector for ease of handling.
video display adapter
passenger side foot panel
The data link connector is in your dash , below the steering wheel . You should see a little rectangular plastic panel that you can remove easily . The connector is behind the plastic panel
There is a small plastic removable panel diectly above the cigar lighter in the centre of the dash. This small plastic panel pops off easily with a small screw driver and voila the connector is exposed There is a small plastic removable panel diectly above the cigar lighter in the centre of the dash. This small plastic panel pops off easily with a small screw driver and voila the connector is exposed
Browse FAQ and find the answer to this question: In 2000 Camry power mirror replacement is it necessary to remove the door panel or is the connector wire long enough to pull the connector end up and any pitfalls in panel removal?
From under the dr. side of the dash, look up at the panel. There will be a small rectangular opening. The connector sits in there. If this panel has ever been removed, the connector may not be visible throught the opening. The panel will have to come off. ----------------------------------------------------------------- Beside of the steering column.
60 amps
It depends on how you have disabled it. If you used hardware switch, use it again to turn on the adapter. You can find the switch on the sides or on the front panel. If you have disabled the adapter in using its properties. You need to go to Network and Connections or something like that depending on OS. And double click on the adapter.