check the fuse panel for blown fuse/check headlight switch
the spark plug gap for a 2000 dodge/plymouth neon is 0.035 the spark plug gap for a 2000 dodge/plymouth neon is 0.035
Open the hood of the engine compartment. Remove the wiring harness from the headlight. Remove the retaining bolts from the headlight assembly. The headlight unit will come out. Reverse the process to install the new headlight.
it is behind the passenger side headlight assembly. you will have to remove the headlight assembly to replace it.
It is not a cover, the headlight is a sealed assembly.
Under the passenger side headlight assembly, you have to remove the entire assembly to get to it.
I have a 1997 Plymouth Neon. The way to replace the headlight bulb is: 1. open hood, and disconnect the wiring connector from the headlight bulb socket. 2. Turn the bulb socket retaining ring counterclockwise and remove the bulb and socket assembly. 3. Pull the bulb out of the socket assembly. 4. Reinstall the bulb and socket assembly in the light housing. Turn the retaining ring clockwise to secure the bulb in the housing.
My drivers lens is all sctracthed and fogged up and my . # vsibility is causing me proublems
pull out the hub and barings on the out side and pull out on the shaft and it should pull right out
one
5w30
No, the years have to match.