Yes, the LG 42LH40 is compatible with VCR's of all kinds. It has the A/V jacks that are necessary to hook it up.
You can use this Plasma TV which will work with any old VCR since you can buy and converter that you can attached to your VCR to the Plasma TV.
Most remotes will also work for VCR's, but you'll have to find the remote code for your VCR first.
A VCR stand is not necessary to make a VCR working properly as it is only a piece of furniture used to hold the VCR. A VCR will work as long as it is plugged into the wall and hooked up to a TV.
Yes, any brand of DVD/VCR combo should work with any brand of TV as long as the TV is equipped with inputs for audio/video jacks (the white, red, and yellow jacks that come with the DVD/VCR combo player).
Most VCR/DVD combos come with a remote, and can be programmed to work with your TV remote.
Hook the coax feed to the ant in on the first vcr. Hook a cable from ant out on the first vcr to ant in on the second vcr (ant in). Run coax from ant out on the second vcr to the tv. To watch the first vcr you have to turn on second vcr and set second vcr on an input setting. There are other ways to do it with a/b switches and splitters. The above hookup allows you to tape on either vcr at the same time. You may have to use the tv/vcr button in some cases also.
DVD VCR Combo connected to HD TV cant pick up digital TV. For it to work it has to be connected to a tuner which is purchased.
You can always hook it up to a VCR with composite cables and it'll work just fine.
If a person has to turn on their VCR in order to turn on the TV, then the VCR is working as the input and the output. If you do not want this to happen, disconnect the cables from the VCR and directly connect them to the TV.
tv 170 and vcr 109. But the menu part does not work
that's what the INSTUCTIONS are for
I bought a RCA Universal Remote Control (Model RCRN03BR) and had to use a VCR code to make this TV/VCR work.The code begins with a "2" because it is a VCR Code. TV's start with a "1".The code is 20081.With this remote, you must do the advance programming to reassign the DVD/VCR button to VCR (it defaults to DVD).Press and hold DVD/VCR button, the power button will illuminate, then press the number 2 and power light will shut off, now release DVD/VCR button and it will work!