if the 98 full-size is 4x4 1500, and the 2003 f/s is 4x4 or 4x2 1500 - yes.
Its kind of a toss up as to what wheels will fit a mark vii although we have 5 stud hubs and axles the problem lies in the front hub and bearing. Most new model fords SN-95 or newer have the hub machined at a 45 degree angle. The problem with most wheels is that the hub sticks to far out without being machined. The second problem is that if you find wheels that fit or machine the hub the center ca[s for the wheels most likely wont fit because of the endcap for the bearing assembly. Machining the rotors are not that difficult i did it in my drive way with a 5 in die grinder. I have 99-04 mustang bullitt wheels on my mark. good luck
Yes, the Metra 99-7865 mounting kit allows a double-din sized cd-player to be mounted in 01-05 Civics
He doesn't. He does not use the word "fit" in that sense or the word "seizure" at all. (He only uses the adjective "fit" as in "fit and seasoned for his passage".
If they werent mentally fit, they would have a breakdown, and if they arent physically fit, they couldn't do their work in 0 Gravity. Please Reccomend.
The duration of Celebrity Fit Club is 3600.0 seconds.
wondering if 98 chevy malibu wheels will fit a 98 gmc sonoma?
No
Yes and you can get grand am wheels 1999-2005, chevrolet malibu 1999-2003
yes
NO.
yea but you have to get a lift and shave wheel wells
No. Chevy and ford 1/2 ton wheels will not interchange.
I would suspect they WILL fit. If the lug bolt pattern is the same, which I am 98% sure that it is, they will fit. Check the lug bolt spacing to sees They have different back spacing and stick out too far. But they will fit on the car.
Measure the length and width of the beds.
The wheels from your 1998 Grand Prix will fit on to the 1999 Buick regal. The wheels from both vehicles are exactly the same.
Yes they will. They will also fit all 8 lug fords until 1999
no!