sparkplog set to start engine
100mm
Blunt 110mm wheels fit on any scooter gay lord. if you liked scooter you would know that, hope this helps
Grit is a word used in specification of grinding wheels. It is used with numbers. Grit means size of the grinding wheel abrasives. So 60 grit means the abrasives filtered in a sieve of size 60(60 slots/inch)
yes / only the 100mm
wet sand it with 1200 grit and polish it
320 grit
yes they do fit but you also have to make sure you have the right clamp.
By the amount and size of grit on the paper. The smaller the number, the less the grit of larger size. the bigger the number, the more the grit of smaller size. 60 grit would be for removing a lot of material, 320 grit would be for finer sanding.
A grit scooter is better (I would recommend the extremist or the elite 2)
Answer: I would start with a 400 grit sandpaper then a 1500 grit sandpaper then I would use a paste car wax to get a nice shine.
I would use a fine grit like 220 or so.
Initially, you can use as any grit you need to get the area straight, once it gets near that stage you need to step up in the grit to remove scratch marks. I would not prime any surface with greater sanding marks than were done with 220 grit. After priming I would block with 400 grit wet or dry