0
What else can I help you with?
Will 9v 300mA power adapter work with a 9v 700mA device?
No, the adapter's power output has to be equal to or greater that the current draw of the device.
Will 9v 1100mA power adapter work with your 9v 500mA device?
Yes, a 9v 1100mA power adapter work with your 9v 500mA device. The mA number is the maximum amount of amperage that the adapter will produce without overloading itself. At 500 mA the adapter will only be working at half load.
Can you use a 300mA adaptor on a 1A device?
Yes, you can use a 300mA adapter on a 1A device, but it may not work properly or could damage the adapter. The device may draw more current than the adapter can provide, leading to insufficient power, potential overheating, or failure of the adapter. It's always best to use an adapter that meets or exceeds the device's current requirements for optimal performance and safety.
Can you use a 12v 1500ma switching adapter on a device requiring 12v 3.0A?
No, if your device require 3.0A, 1500ma adapter which is 1.5A is not enough, voltage wise is fine, your adapter adapter will get warm, then overheat, then very likely fail.
Can you use a 9v dc 210mA adapter on a 12v dc 150mA device?
No, if the device requires 12 VDC then no substitute adapter of a different voltage will work.
What if I Used wrong ac adapter in electronic device?
If the AC adapter gives too little voltage, the electronic device will probably not work. If it gives too high a voltage, you will probably burn out the electronic device, which will have to be replaced or rewired. If the AC adapter is too weak (provides less milli-amperes than the device needs), the AC adapter can burn out. In summary, you need to check: (a) that the adapter should have the correct voltage, and (b) that it provides the required amount of milliamperes (or more) for the device.
Will 9v 1000mA power adapter work with your 9v 300mA device?
Yes you can, however in an unusual situation (i.e. electrical fault in the device), the adapter will allow 5x the current the device is rated for to pass into that device. In normal operation, the device will draw what it needs, based on fans running or not, etc. Under these conditions, as long as the adapter puts out the proper Voltage, the device will operate just fine.
Will a 9v 3500mA power adapter work to replace a 9v 3.5A adapter?
No, the voltage is wrong. The device needs an adapter that only produces 5 volts. The device that you need may state on it 2500 mA instead of 2.4 amps
Will a 9 volt 800 milliamp adapter work with a 9 volt 400 milliamp device?
Yes, the 9 volt 800 milliamp adapter will work with the 9 volt 400 milliamp device. The device will only draw the amount of current it requires, so having a higher amperage rating on the adapter is fine. The voltage should match to ensure compatibility.
Can 9v 1000ma adapter work with a 9v 700ma device?
Yes, the rating of the adapter is the maximum amount of current allowed to be drawn from it. The adapter you state has a maximum of 1000 mA or 1 amp. If the device draws 700 mA's you will have 300 mA's of spare capacity.
Will a 7.5 V 1500 mA power adapter work with your 75 V 1600 mA device?
No it will not. The adapter with an output voltage of 7.5 volts will not even come close to operating a device that requires a 75 volt supply. The best thing you can try is to find an adapter that will output the 75 volts that the device needs.
Will the HP 402018-001 AC Adapter work on a Pavilion?
No the HP AC adapter will not work on a Pavilion. You would need to find the specific adapter for the model you have.
