You'll need an adapter to put that trans on that engine. Check with these guys: http://www.advanceadapters.com/
No, the engine is not the transmission bellhousing. The bellhousing is a separate piece all together.
Right next to the clutch hydraulic line where it enters the bellhousing.
No. The bell housing is actually on the transmission.
Yes, but you will need a v8 bellhousing. And depending on how much power that v8 is putting out, will depend on how long the transmission last. they are rated for about 300 HP
Will the transmission from a 1985 Chevy Celebrity fit a 1991 Buick LeSabre
If you mean, do they make the Chevy Colorado with a manual transmission, the answer is yes; the standard transmission in a base Colorado is a 5-speed manual.
bell housing are the same for bbc and sbc. clutch will need to be correct and check the mounting location lengths compared to the bellhousing for fitment.
no the bellhousing on 99 is made like a ford starter mounts to bellhousing and not to motor and it has a full bellhousing instead of open on bottom
NO. The bellhousing is different on the 1996 model only.
I need to know fluid type speccifications for manual transmission Chevy 1985 s-10 5spd Chevy 1985 s-10 what type of manual transmission fluid
The clutch slave cylinder is located inside the transmission bellhousing. The transmission must be removed to gain access.
A manual 5-speed transmission from a 1995 Chevy 4x4 will not fit in a 1991 Chevy manual 5-speed transmission. The two engines vary in some specifications which makes them incompatible.Ê