Want this question answered?
bandaids and paint?
Maybe if the paint is WHITE! The above isn't always true. I just left it in cause white paint is generally bad to eat/inhale/get on a cut. I've gotten paint in a cut before, and I didn't get sick. I've also eaten finger paint. It depends on what type of paint it was, and also how much you got in your cut. A small amount of paint shouldn't do anything to you.
Cut the middle between the two balls and cut the left one when its swing towards the zombies, then after the right one had swung the top zombie off let it swing to the bottom ones on the left then cut the chain, and then cut the chain to the one zombie on the piece of wood.
Cut-in should technically be done prior to rolling the walls and ceilings because you want to keep a "wet edge" so when all of the paint dries, it blends together. But if you are using a flat paint, this rule is less strict and you can usually get away with doing the cut-in at any point. If after cutting-in (and allowing the paint to dry) you find that you still see the cut-in lines, (and assuming you are using flat paint). Cut-in a second time. The amount of paint on your brush is less than your roller, and cut-in often requires two coats. You will want to "feather -in" the cut-in line into your wall (or ceiling), i.e., dip your brush in your bucket and using the edge of the brush pushed into the cut-in line, apply your paint and drag it along the edge of your line, as your brush releases the paint, stroke the nearly dry brush into the wall or ceiling that you are trying to blend into, this is "feathering." If you are cutting-in with an enamel paint you will probably have to cut-in (do it twice, waiting between coats to let the first dry well) and before the second coat has dried, re-roll the wall, bringing your roller up into the cut-in line.
To stop them from rolling
Cut the shape out of sponge and dab it in paint.
more specific?
You do not need to paint it just cut it clean and leave it to heal. If you want to disguise it rub some soil on the cut.
we begin the commercial with a paint splash and a montage of scenes. [stock footage of wine spilling on carpet, cut to pink paint] [cut to benjamin franklin flying kite, cut to white paint] [cut to lightning strikes, cut to a clip from run a crooked mile, cut to blue paint] [cut to a hand knocking, cut to green paint] spill the wine, lucite who flies my kite, lucite lightning strikes, she's so fine, lucite in my life, lucite that's all right, lucite give us life, late at night, lucite
The process of making mango wood includes the following: First the wood will need to be dried in a kiln. Next is will meed to by milled and cut into shape. Thirdly the wood will need to have a protective oil finish to preserve the finish.
cut polish
paint them, cut them, burn them, and kick them.