0
You are trying to locate thermostat and heater control valve on a 1992 Plymouth acclaim and have not been able to locate either you have diagrams where they are suppose to be but can not locate can yo?
Wiki User
∙ 16y ago
Ive had to replace both. You have to remove the entire dash. They will be in the middle of whats left. There should be a hole with a big box opening that opens and closes...thats it. It takes about...3 or 4 hours to get it all off right...
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
What causes the cluking in the front end of a 1990 Plymouth acclaim?
Check lower control arm bushings.
Where is the idle air control valve on a 1994 Plymouth acclaim?
On the front of the Throttle Body, its held in by 2 Star Screws.
What are pictorial figures that represent programs?
There are many such systems of diagrams used to aid program design (e.g. data flow diagrams, entity relationship diagrams, control flow diagrams, flowcharts).
How do you change the radiator relay fan on a 91 plymonth acclaim?
fan control relay
When you plug thermostat to base to control a gas pack control fuse blows?
control fuse blows when you plug thermostat to base controlling a gas pack unit
When a control is required to control space or product temperature is called a what?
thermostat
Where do you find emission control diagrams?
my diagram is a sticker right inside the engine compartment (ford) autozone has most of the diagrams on their site, too.
Why is there no heat in my 1989 Plymouth Acclaim?
Low coolant? Bad thermostat? Heater core plugged, restricted, or airbound? ============================================================== Good answers by original poster. I would recommend replacing the t-stat first. Its pretty straightforward. If that doesnt solve your problem, our 89 acclaim's have a heater valve (it shuts off coolant flow to the heater core when the a/c is activated to increase the efficiency of the a/c) by the firewall that can stick or lose vacuum (broken vacuum line). Check that next. Lastly, I would take the lines off the heater core and run a garden hose up to it. This will "backflush" any accumulated crud out of the heater core. I do this to my Acclaim every fall and cant believe the crap that comes out! ============================================================== When the heater went out in my car, I went in and found out that it was the heater control valve. Check it out.
What is a special switch that uses a built in thermometer to control temperature?
Bi-metal thermostat
What must be included in a software specification document?
Data and control flow diagrams
How is the gas thermostat different from the thermostat in iron?
A thermostat on the wall measures air temperature to control a gas or electric heating (or air conditioning) system.A thermostat in a clothes iron measures the temperature of the metal ironing plate to control the electrical heating element in the clothes iron.
What is the use of a thermostat in a fridge?
To control and regulate the temperature.
