I have a 93 S10 Blazer and sounds like the ignition lock cylinder is stuck/broken. Try shaking the steering wheel left and right briskly while trying to turn back out the key, making sure to push in on the key and lock shaft.
No it does not if it is a s10 blazer
Try pulling the steering wheel one way, or the other while turning the key.
At key on it should come on for a couple second "bulb check".
Place the key in the "Run" position, but don't start it. Walk away. Come back in about 20 minutes. Turn off the key. Start the Blazer. You're done.
check emc fuse and the fuse next to it
You can, but not while it's running. Before you turn your key, you have to set the parking brake, not all the way but just a bit and then start the Blazer and the lights should stay off.
the backspace key is located above the enter key
Turn key OFF and just unhook the NEGATIVE battery cable for 5 mins and the computer will reset it's self.
cant turn the key ignition on my 1996 aerostar ford
u put the key in and turn the wheel... if hat doesn't work turn the key and the wheel at the same time... every cehicle is like that... if it still doesn't work... then you might have a seized steering column
I have a Chevy Blazer 2000 4 Wheel Drive ZR2 The Spare Is On The Back With a Lock How do I remove the Spare Tire Thank You
Defective ignition switch?