1 Turn the ignition switch to the on position
2 attempt to start the engine. then release the key to the ON position. ( the engine will not start)
3 Observe the SECURITY light. After about 10 mins. SECURITY light will turn off.
4 Turn the ignition switch to off. and wait 5 seconds.
5. repeate steps 1-4 2 more times for a total of 3 cycles in 30 mins. the car is now ready to relearn the Passlock sensor data code.
Start the car as usual. is it not complete.
can I switch ignition cylinder with a different ignition cylinder w/key in a 2004 chevy Malibu without having to use a passcode
The Malibu has been in production on and off for Fifty years, What year are you asking about?
Starter relay protects the ignition switch from excessive electrical draw.
The neutral safety switch is bad, the ignition does not recognize it is in park. Your ignition switch may be bad.
1998 chevy malibu programe new switch
how do u disconnect the cable from the back how do you remove the ignition switch from a 2001 Chevy Malibu you have to put the old key in the ignition. then if you feel around on the bottom of the assembly you will find a small almost rectangular button. depress this and then proceed to turn the ignition clockwise. this will move it to the right position and if everything works correctly it will just slide out.
how do you check the safety neutral switch on a 2003 Chevy Malibu
No i have a 2002 malibu that had the same problem when i checked it was the park lock switch that was causing it
with the ignition on, hold the unlock switch for 10 sec. you should hear chirp
How do i change the ignition switch in a 1988 Chevy camaro
how to replace an ignition switch for 2005 chevy equinox
04 Malibu fuel shut off switch location