answersLogoWhite

0


Best Answer

The screw is used to adjust the headlight beam. Pull towards a wall, and you can see the beam projection to set the headlights evenly.

User Avatar

Wiki User

9y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: You just replaced the headlight assy on your 1997 Acura CL How do you adjust the beam There is a little screw by the gears do you turn that?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you adjust the headlights for a 1996 acura 2.5 tl?

There are small adjustment levers next to the headlight housing on the 1996 Acura T.L. Loosing or tighten it to raise or lower the lens of the headlight.


How do you aim headlights on 2002 Acura?

The are adjustment screws next to the headlight housings. To adjust the headlights either loosen or tight the screws. This will either raise or lower the headlight unit.


How do you replace the headlight bulb located on a 1994 Acura Legend?

replacing headlights on a acura legend 1995


How do you change headlight bulbs for a 1997 Acura 2.2 CL?

Before replacing the headlight bulbs on a 1997 Acura CL prop the hood open. Locate the headlight housing and remove the old bulbs. Install the new lights.


Which fuse is for the Acura RSX headlight?

this web site is useless


How do you change 1999 Acura TL headlight?

To change a headlight on a 1999 Acura TL open the hood and locate the bulbs which are plugged into the housings. Loosen the bulbs and pull them off. Replace them.


Does a 2003 Acura RSX type s have a timing chain or a timing belt?

Chain - which never needs to be replaced - you should have it inspected thought to adjust minor stuff thought


How much does it cost to replace a passenger side headlight on a 2005 Acura TSX?

I have a 2004 TSX and just recently had my passenger headlight replaced for the low cost of $400.00!!! That was including an oil change of course. They have to take the entire bumper off to get to it apparently. What a rip off!


How do you change the headlight assembly on an Acura Integra 2000?

The headlight assembly on a 2000 Acura Integra is held on using bracket bolts. Prop the hood open and locate the headlights. Unbolt the brackets and remove them. Carefully pry the headlight assembly out to not harm the weatherstripping.


How do you replace the headlight located on a Acura Legend?

if its an 88 acura legend then you will need to remove the couple of bolts that hold it down and take it to the local auto store. like other cars you can just replace the bulb but on these acura you need to replace the whole headlight unit


How do you remove headlight housing from 2000 Acura Integra?

call a mechanic they know how.


Why does Acura 2003 TL headlight keep on going out?

your ballast or igniter is broken