answersLogoWhite

0

Add your answer:

Earn +20 pts
Q: You want to connect a onesto digital programmable timer switch on the wires from the distribution board to the geyser with three ports bottom side what wires go where?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Electrical Engineering

How do you wire a 4way switch?

Connect all white wires together under a wire nut and push them back into the box. Connect all ground wires together and then connect them with a jumper wire to the ground screw on the switch. Connect black power in and power out, if applicable, wires to the bottom screw on the switch. Connect the remaining black wire going to the light to the top screw on the switch.


Why transformer is not fabricated on IC s?

Transformers can be fabricated in ICs...! You know how to fabricate spiral kind of inductors in ICs? We can thought of transformers as an extension to this scenario. In spiral inductor fabrication, first we are depositing metal strips in bottom layer, followed by growing the core above that. Then we deposit metal strips above this core in an inclined fashion and connect them using via so that the top end of upper 1st metal strip comes above the top end of lower 1st metal strip and bottom end of the upper 1st metal strip coincides with the bottom end of the 2nd lower strip. In such a way, if we grow the secondary also and connect the cores, we can realize a transformer in an IC... Think of it....!


What happens when you connect 230V ac supply directly to a diode with the help of resistor of the order kilo ohms?

When you connect 230V ac supply directly to a diode with the help of resistor of the order kilo ohms, the diode will conduct on alternate half cycles. Forward bias current will be 230ma for 1KOhm, or 23ma for 10KOhm. Power across the resitor will be 25W for 1KOhm, or 2.5W for 10KOhm. Bottom line - the resistor will get very hot - and if not rated correctly, will be destroyed.


Is is ok if the lighting fixture ground wire is wrapped around the bottom of the chain and the ground wire from the light box is connected to the ground screw on the mounting crossbar?

If you are referring to a porcelain or plastic ceiling light fixture most do not have a place to connect the ground wire. You cannot ground these type fixtures. Just connect the ground wire to the mounting crossbar and forget about connecting it to the light itself. It is on the ceiling and will never be touched unless you change the bulb and then you will have the switch in the off position. It is perfectly safe.


What is the function of radiator in power and distribution transformer?

Radiators are used in a transformer to cool the transformer oil through natural air or forced air flowing in these radiator fins. As the transformer oil temperature goes down due to cooling it goes to the transformer tank from bottom ,cool the windings and gets heated, and then returns to the radiator for next cooling .This cycle repeats as the oil flow is also natural due difference in temperature of oil on bottom and top. In big power transformers this oil circulation is forced by oil pumps for effective cooling. The radiator has many small fins and there are 4-10 radiator banks in a transformer depending on capacity and make of the transformer.

Related questions

What plugs into the bottom of digital camera?

Sometimes there is a spot to connect a wire from your camera to the computer, that way you can upload pictures on Facebook or save them on your computer.


If The middle is the core what is the top and bottom and how do they connect to the core?

whatever are you talking about?


What hoses connect to the bottom of the radiator on a manual transmission?

Nothing on a manual


When connecting low voltage cables to a Secondary Distribution Center where should you start?

At the bottom


What do you click to connect to the Internet?

You can connect to Internet by pressing the internet-icon on the right-bottom of your screen. Then you need an internetconnection. And you're done!


How do you beat level 3 on guts and bolts?

Connect the nozzle to the TOP part of the brain, and connect the BOTTOM part of the brain to the end.


What is the word for two lines that connect your top lip to the bottom of your nose?

philtrum


Why pear shaped flask is used instead of round bottom flask?

even distribution of heat


What does a trapaziod look like?

a rectangle, but the top line is smaller than the bottom, and the sides connect the top and bottom. does that make sense??


Where do you insert your digital camera chip?

It is most commonly found in the battery compartment on the bottom of the camera.


What does Canada's population distribution look like?

dense at bottom of Ontario and quebec and more spread out the higher you go.


How do you draw a triangle with 1 right angle?

Draw an L then connect the top to the bottom right.