Yep you betcha!
One of the best $25 you can invest in your engine.
While you're at it, might as well do the plugs too.
See "Related Questions" below for much more, with lots of tips and tricks on doing these replacements.
A V6 engine in a Mercury Sable takes ( 6 spark plugs )
A 1997 Mercury Sable has ( 6 ) spark plugs There were two 3.0 L V6 engines offered , the " Vulcan " and the " Duratec "
spark plug gap on 2005 mercury sable 3.0 =========================================================== Check the Vehicle Emissions Control Information ( VECI ) decal located in the front of the engine compartment ( it will show what type of spark plugs to use and the spark plug gap )
In a Mercury Sable V6 : firewall 1-----2-----3 4-----5-----6 front of vehicle > driver
According to one of Fords websites : For a 1992 Mercury Sable : The 3.8 liter V6 engine has spark plugs gapped at ( .054 inch ) The website does not show the 3.0 spark plug gap
On a Mercury Sable , V6 engine : firewall 1-----2-----3 4-----5-----6 front of vehicle > driver
They are located in the cylinder heads. Just follow the wires and that will lead you to them
Just had the spark plugs and wires replaced in my 2002 Sable and it cost $420+ tax. Hope this helps
Yes, but you'll have to pull the plenum first.
Be sure to review the "Related Questions" below for lots of tips on changing the spark plugs on a Taurus - Sable.Although mostly written to the 1996-2000 or so engines - the majority still applies to 2002.
Replace the spark plugs and wires. Replace the fuel filter.
Pull off the upper intake plenum and you will have access to the plugs and wires.