Either you have a leak, or, the carb is flooding over, which is common. Older cars like that do not have a pressure return hose, so, when things get hooter under the hood, as they do upon shut off, the expanding gas relieves pressure, at ther weakest point, the needle and seat in the carb, then it overflows into the motor. Make sure the motor is idling before you shut it off, and open the hood, either all the way, or halfway, after you shut it off. This will allow some heat to escape, thus reducing pressure on the line. A carb rebuild may be coming up, soon, though.
Take it to a garage to be serviced by a qualified mechanic.
push your parking brake one click and it will turn them out
The parking mechanism isn't working and the magnet probably needs replaced. Take it to a garage as it has to be soldered in.
The 1998 Chevy Corvette parking brake can be adjusted with the parking brake adjustment bolt. You can also adjust the parking brake cable.
Ensure relays and parking brake switch are properly functioning.
how do I program a garage door opener for a 2002 chevy venture
The 2001 Chevy Cavalier parking brake has an adjustment bolt on the parking brake assembly. Turn the adjustment bolt to loosen or tighten the parking brake.
You don't unless you are parked with the engine running. If you are parked and you want the engine running but don't want the daytime running lights on just shut the car off and set the parking brake then start the car back up. The lights should remain off until you release the parking brake.
On a 1998 Chevy Blazer, the parking brake switch is located on the top of the parking brake assembly. There are 3 bolts that hold the switch to the parking brake assembly.
while your car is in park depress the parking brakes,turn the car off then on again it should be off.only until you diengage the parking brake.
How do you adjust the parking brake on a1994 Lumina?
Push the parking break in just one click and it will turn off the running lights. Make sure it is only one click in or you will ware out your break pads.