It means that you have no traction control, if there is nothing wrong with the system, just press the esp button and the system will turn on. And the light will go off. the top part of the button will turn it off, and the bottom will turn it on. If the system is working.
When you turn off the car, with the key. And restart the car, the light should stay off.
This is normal.
In most cases it means one of the wheel speed sensors has gone bad and needs to be replaced.
bas esp light
Could be failed brake light switch
center your steering wheel
The ABS (anti lock brake) computer has detected a fault in the ESP (electronic skid protection) or BAS (brake assist system). You will need to have the system checked for codes to know possible causes.
You have to fix the cause of the code that is set in the ABS module.
No. BAS (brake assist system) and ESP (electronic skip protection) are part of the antilock brake system. They have nothing to do with the oxygen sensors.No. BAS (brake assist system) and ESP (electronic skip protection) are part of the antilock brake system. They have nothing to do with the oxygen sensors.
I used to get the same light frequently. What I do is, make the wheels in straight position, stop the car, stop the engine, remove the key and then start the engines again. this is it.
ESP on Jeeps and most newer vehicles stands for electronic stability program. ESP includes such functions as traction control, ESC (electronic stability control), and BAS . BAS stands for brake assist control. All of these functions help control the jeep when the computer senses wheel slip, it corrects itself by reducing engine power and/or applying the brakes any given wheel. When the ESP light is flashing that means the system is active, when the light is solid, the ESP system has turned off the ESC and traction control, BUT NOT BAC!! The only way to turn off the ESP completely is to pull the 20amp abs fuse.
That light comes on when the abs computer detects a malfunction and sets a code. You need to have the system tested with a scan tool.
There is a failure in the electronic stability or brake assist system.
check for a blown fuse in the trunk, driver's side, fuse box.