0
If you mean the range of IP addresses in the subnet, additional information is required. Specifically, the subnet mask.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Assuming no subnetting what are valid Class B host addresses?
A classful class B network has a network range of 128 - 191. For host addresses, anything that is legal for an IP address in the last 2 octets would be a valid host address for a class B with no subnets.
What is specified by the host bits in an IP address?
The network part of an IP address indicates the network to which the host belongs. The host bits or host part of an IP address points to the actual device that has an IP address on the network. It can be a computer, printer, router or any device with an IP address that has the same network part.
What is the network address of ip address 192.150.8.24?
The network address of this ip address is 192.150.8 and 24 is host ip address
What is a host on network?
A host on a network is generally a device with a unique mac address (hardware address, set at the factory) It can be a PC with a network device, a network switch, a printer etc etc hosts can have an IP address mapped to their mac address's
What is the valid ip address with network number 190.254.0.0 using 11 bits?
This assumes you know how to subnet. On a network with 190.254.0.0 as a host address and using 11 bits for the subnet mask. The network address is 190.224.0.0 and the end of the range is 190.255.255.224. The address you show is within this range so cannot be the network address. If you don't know how to work this out manually use a subnet calculator such as the one on this URL: http://www.boson.com/FreeUtilities.html
What is the host id of this IP address of 131.107.2.200?
Since this is a class C network address, the host id is 24, the network id is 201.123.87.0
What is the valid IP host for the network ID 190.254.0.0?
If you aren't subnetting, then the host range for this network would be: 190.254.0.0 - 190.254.255.255 The above shows the IP address range, but not all addresses would be usable (mostly the first and the last addresses would probably be not assignable to a device).
What is the network ID and what is the host id of ip address 110.10.10.1?
Assuming that this is a Class A network (Class A Networks range from 1-127) the default subnet masked is 255.0.0.0. Therefore the network ID would be 110.0.0.0 and the host ID would be x.10.10.1
What is the Network mask of IP 185.185.0.0 in dotted decimal How do I calculate First host of the major network IP address What would be my last host of the major network?
What is the Network mask of IP 185.185.0.0 in dotted decimal? How do I calculate First host of the major network IP address? What would be my last host of the major network?"
Which octets are used for the network address and for host addresses in?
Assuming we are talking IPv4, the split between network and host is determined by the subnet mask. In binary, where there is a "1" it is network, where there is a "0" it is host. A+ pg. 870: A: 1st octect: Network; 2nd,3rd,and 4th: Host B: 1st and 2nd octects: Network; 3rd and 4th octets:Host C: 1st,2nd,3rd octects:Network; 4th octect: Host
What part of an IPv4 address specifies a particular network interface on the network?
The host portion specifies the particular network interface's address. The network portion specifies the network address.
Why does a network host need to broadcast an ARP request?
A host on a network needs to broadcast an ARP request to advertise its Mac address. The networking world is very chatty in nature and when a new network host is available it immediately broadcasts its Mac address as with a ARP message. Also when a particular network host needs to send a data packet to another network host available in the same LAN whose Mac address is unknown, the first network host sends out a ARP message requesting for the destination network hosts MAC address.
