How to Replace an Auto Air Compressor?

Answer 1

Freon coolant is frequently circulated through an air conditioning compressor by way of a number of different hoses and lines into a condenser and an evaporator, and finally, it cools through a blower. It is possible for the compressor to fail, typically because there is not enough lubricant, and this will require having to replace it. If you intend to replace your compressor, it is important to work carefully with the coolant and with the electricity that occurs within your vehicle. You can probably replace your compressor in under two hours.

1. Take out all of the Freon coolant that is present in the system. You can typically get this done at no cost from any oil change facility. However, do not use amateur equipment or let it vent out into the open atmosphere.
2. Turn the positive terminal off and remove the battery. Turn it away from the battery.
3. Locate the connections that harness the wires and remove the adapter from the socket of the compressor. It may also be connected to the blades. Take the line nuts and rotate them counterclockwise before setting aside the coolant lines.
4. Pull the tension pulley arm and take out the belt, ensuring that you slide it out from beneath the pulley wheel, which should be idle. This will enable you to have enough lack to take out the belt from the pulley wheel of the compressor. If you have one belt, it will come with an adapter bolt that allows the compressor to easily slide while it is set counterclockwise, which lets the belt become removed.
5. Now you must locate the mount nuts and turn them counterclockwise, sliding them outside of the arms. Take your new compressor and insert it directly into the position of the mount arms, followed by replacing the bolts for the mount through their arms as well. You will need to then turn the nuts clockwise to fasten them Take the Freon lines and insert them back into their original position, making sure to take a close look at the gaskets while you are putting them back in. Now you may put the belt back into it and reconnect the harness for the wires and the adapter plug.