0
An aerial lift is very similar to a boom lift, as they both are used to ascend up in a construction site and work in hard to reach areas. The aerial lift operates by extending its arms and joints to ascend and maneuver the operator where they want to go. Using one of these lifts sound simple, but operating it correctly will virtually eliminate hazards.
Inspecting the Aerial Lift
You’re going to want to inspect the lift before you operate it. Even though it doesn’t seem like you would need to, you really do. Check for leaks that might be coming from beneath the aerial lift platform and also from hoses or fittings. Check the tires and controls as well. Checking the controls means starting the lift and changing the control over to the “ground” or “base,” and also checking all of the functions of the lift. After checking the controls, make sure to switch the lift back over to “platform.”
Remember to check the area for any hazards or obstacles. It’s not advised to operate the aerial lift on uneven ground or in risky weather conditions.
Entering the Aerial Lift
After you’ve done an extensive check of the aerial lift, put the harness on and climb into the lift. Make sure to affix the harness to the safety hook on the lift (found on the rail). Before ascending, make sure that the lift is as close to the desired work area as possible. You want to drive the lift while ascended as little as possible to minimize the risk of injury or fatality.
Operating the Aerial Lift
Set your safety outriggers and ascend with the arm that extends under the basket. If the job requires more height once fully extended, use the second arm. Lastly, you’ll want to raise the articulated boom. Now you can fine-tune the correct angle and height of the arms so that your work area is easily accessible.
Exiting the Aerial Lift
When you’re completely finished, shut the lift down and descend until you are back where you started. Shut all things down and remove the key from the ignition. Remember to fill up and charge the power source as needed!
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
When was Aerial Lift Bridge created?
Aerial Lift Bridge was created in 1905.
What is the most common thing that an aerial lift is used for?
There are actually two types of aerial lifts. An articulated aerial lift is commonly used in either the consutruction, cable and wire, or telecommunications industries. The scissor lift is used for the purpose of stacking platforms.
How long does it take the aerial lift bridge to lift?
It takes 1 and a half minutes to lift.
How often does an aerial lift in Vermont require a safety inspection?
An aerial lift in Vermont require a safety inspection every year. Read more at articles.directorym.com/Aerial_Lifts-a800221.html
How does an aerial bucket truck work?
Aerial bucket trucks use a hydraulic lift to put workers at a desired height. One worker stays in the bucket on the exterior of the vehicle while another rides inside to operate the truck.
History And Current Use Of The Aerial Lift?
The aerial lift is not a new creation; it has been around for hundreds of years now in various forms. The three most common types of aerial lifts are aerial trams, gondola lifts, and Funifors. The aerial tram was the first type of aerial lift available. Invented by Adam Wiebe in 1644, the tram was used for mining and other industrial purposes until the early 1900s when it began to be used for the transportation of people. The 1920s saw the rise of using trams and cars as sight-seeing investments due to the economic boom’s creating a middle class. This middle class was very interested in spending its leisure money on such adventures; as a result, the Swiss, German, and Austrian Alps were able to be seen from the comfort of a tram car for the first time ever. Gondola lifts are often mistakenly thought to be the same as aerial tramways. The difference is that while an aerial tramway uses a fixed cable system to suspend gondolas and actually moves the gondolas or cars attached with another rope or cable, the gondola lift uses a moving cable. Cars or gondolas are attached directly to the moving cable.The Funifor is another type of aerial lift which uses two fixed cables with two cars being pulled by a haul rope. Its main attraction is that in high-wind situations its two cars can be pulled up beside each other and bridged in order to aid in a rescue attempt. Today, aerial lifts are used for a limited number of activities. One common use is to get tools and such around at construction sites or within buildings where manufacturing is happening. A more unique use of the aerial lift is by NASA as an emergency escape method. Two launch pads at Cape Canaveral have emergency escape aerial lifts for the launch staff and astronauts to use for a quick get-away should anything go wrong and create a dangerous situation. Probably the best-known use of an aerial lift system is the ski lifts that many people are familiar with. These can be found at multiple ski resorts and parks and will generally give skiers a lift to the top or bottom of the mountain.
Is an aerial lift commonly available from an equipment rental firm?
Aerial lifts are pretty common for rental. They are available are most equipment rental firms.
How can you use aerial in a compound complex sentence?
this is an aerial.
What are the advantages of aerial lift over mechanical lift?
Ariel lift is considered a mechanical device. It is used to provide temporary access for people or equipment to inaccessible areas.
When working in a aerial lift you are required to tie off it is permitted to tie off to?
lifeline
Where in Ft. Worth can I find an aerial lift rental?
Hertz Equipment Rental Corp
Can Lugia Use Aerial Ace?
Yes. Lugia can use aerial ace but only through a TM. Aerial ace is not learnt by levelling up.
