0
Every roof requires regular inspections so repairs can be made before leaks set in. You can inspect your roof without every setting foot on your shingles by using a pair of binoculars. Staying on the ground and using your binoculars, you can inspect the shingles all around your roof. Look for any that are curled, broken or missing completely. The attic should be inspected for leaks. The binoculars and a good flashlight will allow you to see throughout the attic. Watch closely for rust stains on the nails and condensation. Finally, step back and look at the overall roof. Dark stains running down the shingles indicate a loss of the protective granules and could indicate that it's time for a new roof.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What are the different types of roofing material options?
All roofing shingles and tiles naturally stand up to the elements over a good period of time. Asphalt roofs are less expensive than a tile roof and they channel water better.
How do you know when to replace a roof shingles?
Sooner or later, every roof needs to be replaced, usually due to the long-term effects of weathering. If a residential roof is more than 20 years old, it is a prime candidate for re-roofing.To determine if you need a new roof:On the ground, walk around your home with binoculars and inspect your roof for cracked, curled or missing shingles, as well as any excessive loss of the protective mineral granules. DO NOT CLIMB ON THE ROOF; walking on the roof is dangerous and can damage your roof.In your attic, take a flashlight and look at the underside of the roof deck and rafters for any stains or wet spots indicating water leaks.Asphalt shingles can often be applied directly over existing roofs without the necessity of tearing off the old roof. However, new shingles cannot be properly applied over hard or brittle materials, uneven surfaces for nailing or roof decks with warped, rotted or unsound support that should first be replaced or repaired.Some local ordinances forbid re-roofing over two or more layers of shingles. If a home already has been shingled several times, it is important to first determine if the roof deck can support another layer of shingles before undertaking any re-roofing project.
There are different types of roofing structure what are they?
The different types of roofing structures include the Mansard roof, Gambrel, Saltbox, Hip roof, flat roof, Cross Gabled roof, and many others.
How To Choose The Best Type Of Roof Shingles For Your Project?
Whether you’re putting a new roof on your house or the storage shed in your back yard, choosing the correct roof shingles is a very important step in the process. You want to get something that will last for some time to come, but you don’t want to spend an arm and a leg either.Where you live will in large part determine the kind of roof shingles you are able to get for your project. Local codes will have a hand in the decision process as well. Before buying the perfect shingle for your new roof, take a look at what the building inspector will allow you to build with. This will save money, time and frustration in the long run.Perhaps the most popular and widely used types of shingles are called composition shingles or composite shingles. Composite shingles are made, like the name suggests, from a composite of different materials that work together to form a long lasting, high quality shingle that is relatively inexpensive when compared to other shingles. They come in a dizzying array of colors, shapes and designs.Another very popular kind of shingle is the asphalt shingle. Better suited for cooler climes, asphalt shingles and fiberglass-based asphalt shingles, like composite shingles, are prized for their durability and low prices. With manufacturer guarantees that they will last 20 to 50 years, they remain very popular.Cedar shake shingles have a certain romantic attraction to them. However, their drawbacks are significant. They are expensive. They can rot. They can burn. Although many are pressure-treated with fire retardant, they will need to be periodically retreated. They require proper installation and maintenance. However, for the people who love them, there is no substitute.Clay roofing tile, while technically not a shingle, is a very popular roofing material. Long-lasting, fireproof, will not rot and can’t be damaged by insects; clay roofing tiles have a lot of things going for them. However, they are heavy, often requiring extra support to the roof, and are also expensive.There are new technologies constantly improving and being adapted to roof shingles. Rubber, metal and concrete are all being adapted for use in roofing with varying results. However, as with all new things, products without proven track records could result in disappointment down the road. The best advice is to choose roof shingles that have proven track records to back up their decades-long guarantees and have them installed by a professional contractor.
Do roofs absorb heat?
this is a sort of tricky answer, shingles and felt paper and other roofing materials definitely get hot, but if you are speaking about your roof perhaps absorbing the heat from your attic, then almost not at all. you need to install roof vents if you want to keep your attic bearable. any decent roofer can do that without any leaking.
Where may a person purchase metal roofing materials online?
The roofing direct website is a good place for the online purchase of metal roofing materials. It sells a large variety of metal roofing materials and quotes all prices without requiring a login or username. It also describes installation and has contact numbers for support.
Roofers: The Roofing Industry, Job Duties, Training, and Average Salary?
Roofers, otherwise known as roofing contractors, are within the roofing industry, which also includes the siding industry, in the section of construction. In the US, there are over 20,000 existing and operating businesses in the roofing and siding industry. All these businesses, combined, bring in annual revenue of approximately $30 billion. The general jobs that roofers perform are:  Roof repairs  Roof installations Ultimately, there is a lot more work involved in a roofer’s daily schedule, besides just repairing and/or installing roofs. The construction contractors do a few different types of work each day, and they work with a variety of materials and tools. Roofers use materials like asphalt, tar, gravel, rubber, and metal for repairing a roof or installing one. Contractors generally have to climb ladders and/or staging to get up onto rooftops and most of them will have to carry shingles up to the roof area, which can weigh a lot. Some companies that work on roofs do have better mechanisms to get shingles up to higher levels, but some still do most work manually. Roofers work on commercial and residential jobs. The roofs for each; commercial and residential, are usually different types, in regard to the slope of them. Residential roofing is usually steep and commercial roofing is usually moderate. Tools and equipment/accessories that roofers use are galvanized roofing nails, roofing screws, vise grips, tin snips, drills, shears, roofing gun, hammers, skill saws/circular saws, asphalt shingles, roofing tiles, slate and/or metal roofing materials, shakes and other types of shingles, sheathing, trusses and so forth. There are times when a contractor will have to work around a chimney and flashing when he or she is repairing or installing a roof, as well, and this requires a trained individual that knows what techniques are used to install a roof or repair one without having future leaks. The majority of roofing contractors have been trained, either by work experience or by being an apprentice. There are apprenticeships that one can join that last for approximately three years, if a person wants to learn this trade in that manner, but most roofers will learn as they go, while they work. Some employers will pay for an individual’s further training and/or education. All training programs will cover training regarding safety. It is not a prerequisite for someone to have this form of training or education, but some employers may not hire a person without some type of roofing background. For example, some employers might be looking for roofers that have mechanical drawing and mathematics abilities. Contractors in this industry do need to be licensed in the state in which they work, and they need to be bonded, such as surety bonds. The average annual salary for roofers is approximately $43,000. Ultimately, roofing contractors can make more than this, depending on experience and training, and depending on the location of the company; also the weather in the area in which the roofer works.
Will tar paper work as roof covering on a deck without shingles?
no, because eventually it will dry out and crack, or blow off. the shingles are built to withstand the heat, rain and wind.
Can a nurse without chickenpox exposure take care of a patient with active shingles?
A nurse without proper immunization is fooling herself.
You are in a hurry but you remember to inspect your car?
Without touching the car, inspect the exterior to include wheel wells and undercarriage. Alert the hotel manager or police if any sign of tampering
What is walking barefoot called?
Its called "barefooted walking" or "walking barefoot." Some people say "walking without shoes or socks" or "going barefoot."
What are the advantages of fiberglass roofing over ordinary roofing?
Fiberglass roofing is usually used for smaller outdoor structures like porches, patios, sheds, or greenhouses. It costs less than other kinds of roofing, it’s strong, it’s light, it’s flexible, and it’s easy to work with. (You can use a saw or a drill or a hammer and nails on fiberglass panels without doing them any harm.)
