Pool Care and Cleaning

Pool Filter?

001

Top Answer
User Avatar
Wiki User
Answered
2012-02-13 22:28:47
2012-02-13 22:28:47

form_title=Pool Filter form_header=Pool service professionals are available to help you with all of your pool filtration needs. Are you having problems with the filtration system of your pool?*= () Yes () No Do you need a pool filter installed?*= () Yes () No Is your pool above ground or in ground?*= () Above ground () In ground Is your pool a chlorine or salt water pool?*= () Chlorine () Salt water

001
๐ŸŽƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Related Questions


Setting the filter to backwash cleans the filter, running your pump to filter cleans the water in the pool. Brushing the walls of your pool cleans the walls of your pool... and so on.


You don't . You chlorinate the pool with chlorine . You filter the water with a sand filter.


There is no diference. There are different types of pool filters, but it has more to do with how they filter then their application or location.


They are probably a sign that it is time to replace the filter of your pool.



The cleaning schedules varies from filter to filter, but a general guideline on any swimming pool filter is to take a reading when the filter is clean, then clean the pool filter when the pressure rises about 10 psi.


A pool skimmer is generally built into the side of or around the top of a swimming pool in order to skim debris from the surface of the water. A pool filter is built into the plumbing in order to filter fine debris from the water itself.


The sand filter wont make a pool green this happens a s a result of algae.


Salt is not a filter, it is added to pool water to allow a chlorine generator to operate.


i have a intex pool 12x 30 uses filter size A how long should i run the filter for


I assume you have a sand filter if so you most likely have broken laterals in your filter. A lateral should allow water through but not sand. if you have a DE filter and you are getting what appears like sand in the pool, you have one or more of the filter grids that have holes and the DE is passing through the filter grids back to the pool.


You don't have to change the pool filter for years Unless it gets damaged. You do however have to clean the pool filter whenever the presure leading to the filter gets too high. This indicates a dirty filter that is not allowing water to get through effectively.


There is no point back-washing the pool if the filter is not dirty as this will only waste water and if you have a saltwater pool salt.


You have one or more bad filter elements inside the filter. The filter needs to be serviced .


If you have a pool filter and you are using tablets no if no filter I would to be safe.


Average pool filter: Backwash 5 minutes and rinse for 1 minute.


You back wash a pool filter not a pool pump. Read your manual. Call the pool store with the brand of filter and back wash valve that you have and they will advise.


To bypass a non functioning pool filter, or to keep your pool filter in pristine condition, first you need to back wash the pool. Once the pool has been back washed, you will need a leaf skimmer, a telescoping pole, a tile brush, a pumice stone, an algae brush, and a pool vacuum.


First of I think you may be referring to the pool filter not the pump. "Filter" runs the water thru the filter thus filtering the water. Recirculate, I believe, bypasses the filter media and sends the water back to the pool unfiltered. K


Clean the filter, enlarge the filter, enlarge the pipes coming from and or to the filter, enlarge the pool pump, If you have a cartrige filter put another one in paralel next to it.


the way that a water filter works is that when you fill the water in the pool the water will go in the filter then come back out as clean water.


There is no filter at the bottom of a pool. Perhaps you are looking at the hydrostatic valve which is there in case your pool is emptied and Will make sure that the pool wont float in ground water.


Filter unless you don't want to filter the water


Backwashing a swimming pool cleans out the sand filter. It reverses the flow to push all the trappings from the filter out.


IT is possible that you have a damaged cartridge in a cartridge filter or the sand filter is not set on filter when you vacuum or the laterals in the sand filter are worn and it is blowing sand back into the pool.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.