Adding algae control to the pool skimmer helps to disperse the chemical and coats the filter media.
Empty the skimmer baskets and the basket that's attached to the pump. Then backwash and rinse the filter.
Attempting to obtain step by step diagrams connecting an above ground pool to a sand filter.
you may have to prime your pump Clean or replace the filter.
submerge the hose in the pool first to get all of the air out, then attach to the skimmer.
Firstly, the pump is not a sand filter system. The pump is the one with the motor attached and it pumps water not sand. The large round tank is the "sand" filter. You would have to find a skimmer made for vinyl pools with gaskets. It attaches to the wall of the pool and is seen "hanging" from the outside of the pool. The type of pool and equipment have no factor in choosing a skimmer. another good way to go is the Dragonfly Super skimmer this is a floating pool skimmer and only requires a hose to connect it to suction
To bypass a non functioning pool filter, or to keep your pool filter in pristine condition, first you need to back wash the pool. Once the pool has been back washed, you will need a leaf skimmer, a telescoping pole, a tile brush, a pumice stone, an algae brush, and a pool vacuum.
yes you can, just make sure that no one blocks the skimmer or the water return hole.
If you have the regular set up that includes a skimmer, pump and filter then you don't have to waste any water. Get an lid-to-hose adapter, that fits over the skimmer basket at your pool supply store. Fill the hose with water and attach it to the lid. Place the lid inside the skimmer over the skimmer basket, then vacuum to your hearts content. Pool Masters
Me quit
No. You cannot use the main drain to lower the water level below the skimmer. This is because the main drain is not really a drain. It only connects right back to the 3 port valve in the skimmer.
You must have a vac system. Use it to remove the dust. The pool equipment can not do it all you have to help keep the pool clean by vac the pool, adding chemicals, cleaning the tile line etc. A pool is a money pit and labor intensive. You could also have a broken filter element with a D E filter. In that case get the filter repaired.