0
Because heat rises, most homes have cold floors in the wintertime. Radiant floor heating provides warm floors and uniform heat throughout the rest of the room. The heat rises from the floor and warms people and objects in the room, creating a cozy atmosphere. The heat produced from radiant heating does not dry the air – or your skin - like forced air heat, and when the air is not dry it feels warmer, so you will be more comfortable even if the room temperature is lower. It will also help prevent the dry cracking skin associated with dry winter air. Your heat will not be directed to certain areas of a room and leave cool spots in other areas, and your children will not have to play on drafty floors.
Forced air heating systems are not as efficient as radiant heat because some of the energy is lost while traveling through the air ducts, and the moving air coming from them usually contains dust and allergens which can cause problems for people who suffer from Allergies or Asthma. When you have air vents in the floors, arranging furniture can be difficult because you must be careful not to put something over a vent or in front of a vent, which would greatly reduce its effectiveness. Forced air heating is sometimes noisy, but radiant heating does its job quietly and efficiently.
Radiant floor heating is energy efficient, so your heating costs should decrease, and you will be doing your part to protect the environment while you save money on utilities. Radiant floor heating will also increase the value of your home, which will be a benefit if you decide to sell it in a few years.
You can regulate the temperature in each room with some radiant floor heating systems and save even more energy by keeping bedrooms, pantries and laundry rooms cooler than the rest of your home, and if you want extra warmth in the bathroom, you can have that too.
You will surely enjoy the clean quiet heat from your radiant floor heating system, and you won’t have to keep house slippers handy to put on your feet when you get out of bed, because the floor will be warm.
What else can I help you with?
Is in floor electric radiant heat energy efficient?
Very efficient and warm on the feet. I have it. One drawback is the initial cost is higher for installation over other heating systems. Once the floor slab heats up there is minimal input heat to keep it there.
Floor Heating Installation?
form_title=Floor Heating Installation form_header=Keep warm with floor heating. Get floor heating installed by the experts! Do you have central A/C and heat in your home? = () Yes () No () Not Sure What material is the floor made out of? =_ How large is the are that requires floor heating? =_ Desired Start Date =_
How can I install floor tile heating in my home to keep my floors warm and comfortable during the colder months?
To install floor tile heating in your home, you can use electric radiant heating mats or cables that are placed under the tile during installation. These systems provide warmth to the floor, making it comfortable during colder months. It is important to follow manufacturer instructions and consider hiring a professional for installation to ensure safety and effectiveness.
Who was the first American to build stove for heating?
This type of heating is called radiant heat, and in 1742 Benjamin Franklin developed a cast iron stove called the "Pennsylvania Stove," but this form of heating dates back to ancient Rome. They had a heating system called a hypocaust and what they did was lift part of the slab floor and the spaces in the walls to pipe in heat from fires outside or under the floors. The ancient Roman baths heated the rooms and the water in this manner. Below the baths were slaves keeping fires going to keep the water hot. In 1907 a man by the name of A.H. Barker made a "radiant panel" that ran pipes connected to a hot water heater under the floor, and Frank Lloyd Wright developed "gravity heat."
Can I keep my existing radiators if I have radiant heating installed?
You don't need to have the old radiators removed. However, if they are disconnected from the heating, they are just taking up space, so you might as well get rid of them. They may be worth something to a scrap merchant.
Where is the radiant barrier located?
A radiant barrier is typically installed in the attic, either under the roof or on the attic floor, to reduce heat transfer into the living spaces below by reflecting radiant heat. This positioning helps to keep the living areas cooler in hot weather.
How an electric motor can keep a house warm?
An electric motor can keep a house warm by powering heating systems, such as electric furnaces or heat pumps. These systems use electric motors to drive fans that circulate warm air throughout the home or to compress refrigerants that absorb and release heat. Additionally, electric motors can operate baseboard heaters or radiant floor heating systems, providing consistent warmth. By efficiently distributing heat, electric motors help maintain a comfortable indoor temperature during colder months.
How to Choose the Right Hot Water Radiant Heat System?
Radiant heat is a great choice for heating your home and a hot water radiant heat system may be the best way to keep your house warm on cold winter nights. Here are some tips on the different installation methods to help you decide if hot water radiant heat is right for your home. Unlike forced-air heating, which is designed to heat the air, radiant heat warms the floor. Regardless of what material your floor is made from, the floor absorbs the heat from the radiant heat source and then releases it into the interior of the house. This is a far more efficient use of heat and the source of major cost savings. As with any heating system, it’s easier to build hot water radiant heat, also known as hydronic heat, into new construction than attempting to retrofit it into an existing house. Whether your house is new or existing, the installation methods are the same. Most hydronic heat systems use cross-linked polyethylene tubing known as PEX. If your ground floor is on a cement slab, the PEX tubing can be installed at the same time as the slab is poured. If you have a basement, the PEX can be strung under the subfloor through the joists and sealed in with insulation and a plywood “ceiling.” With a ground floor that is inaccessible from underneath, you have a number of options. One is to lay the tubing on top of the current subfloor using “sleepers” or trusses as the joists and filling the space with sand or a light cement if your structure can withstand the extra weight. If not, you can leave the space unfilled as if you had strung the PEX under the subfloor. With each of these options, once the tubing and insulation is installed, a new subfloor is laid over the new tubing system. While hot water radiant heat is not ideal for every situation, it is always a viable alternative in new construction whether it’s for a whole house or a new addition. With the right flooring design, you’ll enjoy the quiet warmth and the lower fuel and maintenance costs for years to come.
How do you convert boiler heating surface to horse power?
To convert boiler heating surface to horsepower, you can use the formula that one horsepower is equivalent to approximately 10 square feet of heating surface. Therefore, you would divide the total heating surface area (in square feet) by 10. For example, if a boiler has 100 square feet of heating surface, it would be equivalent to about 10 horsepower. Keep in mind that this is a rough conversion, as actual performance can vary based on boiler efficiency and other factors.
How many packs of laminate to cover a 15ftx12ft floor?
It depends on how many square feet of laminate are in each package. Your floor is 15 x 12 = 180 square feet. The box of laminate will list on the label how many square feet are in each box. Divide your square feet (180) by the square feet in the box (?), and you will have your answer. Be sure to add about 7-10% for waste, and keep an extra box in storage to use if you ever damage part of the floor later.
Where should one place their legs on a table for proper etiquette and comfort?
When sitting at a table, it is considered proper etiquette to keep both feet flat on the floor. Placing your legs on the table is generally seen as disrespectful and impolite. It is also more comfortable to keep your feet on the floor to maintain good posture and avoid strain on your back.
Does the floor exert an upward force against your feet?
Yes, the floor exerts an upward force on your feet in response to the gravitational force pulling you down. This force is known as the normal force and it helps to support your weight and keep you from falling through the floor.
