0
Every year cars get small, micro dents. Going over the surface, you see these small indentations as pockmarks, and although no one else can see them, you can. Eliminating large dents is a straightforward process involving some sanding, using a little dent filler, more sanding and finally painting. However, fixing a tiny dent with the same process means wasting time. Thankfully, using a paintless dent remover solves the problem. Paintless dent removal challenges even the most skilled automotive professionals. Trying to bend and shape stiff metal without scratching may sound easy, but it is very difficult. In fact, if done incorrectly, you can damage a car even more. There are two techniques which can make repairing tiny dents much easier.
Touchless TechniqueThe first method, the touchless technique, only requires a hair dryer, compressed air and detergent. First, clean the dented spot completely. Then, plug the hair dryer in and place it on full heat over the dent. This method uses the pliability of metal under extreme temperatures to fix the dent, so the hair dryer takes a few moments to apply significant, even heat. After five minutes have passed, immediately position the compressed air over the hot spot and spray. After 20 seconds of spraying, the extremely cold air will cause the metal to contract and the dent to pop out. Allow the ice crystals to dry and then wipe off.
Pulling TechniqueThis second method, the pulling technique, involves physical contact and presents a greater risk of damage. Light the area of the dent sufficiently because the reflection of light will guide the dent repair. Work a small, dent removing rod into the cavity of the paneling, usually easily accomplished through a seam. As you work the rod in, look at the reflection of light which clearly shows the entire dent. Working from the outside in, push very gently. By slowly working your way up the dent, you should have a perfect door or panel as good as new.
Use the touchless method for small dents, but for large ones, using dent removal rods in the pulling technique is preferable and more successful.If paintless dent removal makes you too nervous, take it to the professionals. Nervous hands usually do not do the best detail work.
What else can I help you with?
Paintless Dent Remover?
form_title=Paintless Dent Remover form_header=Remove minor dents and dings from your vehicle! We will help you find the mechanic that best suits your needs. What is the year, make and model of your vehicle?=_ On a scale from 1-10, how severe is the dent damage? (1=minor 10=severe damage).= {(1),2,3,4,5,6,7,8,9,10} Where on your vehicle is the dent(s) located? Please describe.=_
Where can a person find paintless dent removal services?
Yelp is a good place to find Paintless Dent Removal services. They have many listings, contact details and addresses for Paintless Dent Removal and a number of customer reviews.
Paintless Dent Repair Tools?
form_title= Paintless Dent Repair Tools form_header= Fix dents in your car easily. What color is your car?*= _ [50] Where is the dent?*= _ [50] What is the size of the dent?*= _ [50]
What tools are used for paintless dent repair?
The tools for paintless dent repair allow for the panel to be both pushed out by metal rods and pulled out by glue or tab. Additionally good lighting is needed to view the dent.
Paintless Dent Repair Shop?
form_title=Find A Paintless Dent Repair Shop form_header=Fix dents in your vehicle by using a trusted repair shop. What caused the damage?=_ Will your insurance cover the repair?= () Yes () No Is the repair to be made on metal or fiberglass?= () Metal () Fiberglass () Other
Where can one get a paintless dent repair?
One can get a paintless dent repair by one of two ways. The first way is to check local listings in Yellow pages or a similar book that has local business listings and get one there. The other is to use online websites such as Yelp to help find local paintless dent repairs that way.
How much does paintless dent removal cost Is it priced by the dent?
By the way, the dents were caused by hail and are on the roof.
What are some paintless dent removal tools?
In most cases paintless dent removal tools are metal rods and body picks that help push dents from the underside of a panel. A home remedy for taking out dents is a plunger.
Are there any tools that I could buy to do paintless dent removal myself?
You've got lots of online options, including Ultra-Dent Tools, DentCraft.com, and PDR.com. PDR or paintless dent removal tools are also available at DentMagicTools.com with a risk free trial and full warranty.
How do you fix a dented door?
If its a nice big wide dent you may be able to pop it out take off the door panel make sure the window is up use a small block of wood to pop it out if its a small dent then you need a grinder pondo primer paint sander etc a lot of time an patience When a dent occurs, the metal is pushed in. The force that pushed in the metal also pushes some areas around the dent out. These are ridges or crowns that must first be pushed down to relieve the pressure and allow the dent to be pushed out from behind, or if large and soft enough pulled out with a suction cup. Paintless dent removal is the art of removing dents without the use of paint and bondo. Paintless dent removal technicians use tools to push the dent out from the back side of the dent. You can find paintless dent removal technicians in your area by searching for paintless dent removal on Google in your area. PDR Paintless dent removal technician can remove most dents at a lower cost than most conventional body shop repairs.
Where can you get paintless dent repair training in Oklahoma City?
There are a few paintless dent repair training schools that are located through out the United States with training locations in each state. A few of them will actually fly you out to their location and will even teach you on-site.
Hire A Professional Paintless Dent Repair Technician And Save Money?
To remove a minor dent, ding or crease from your vehicle, save time and money by investing in paintless dent repair. This technique allows you to preserve the original paint on your vehicle and thus increase its value. Performed by specialized technicians, paintless dent repair can be used to repair dents smaller than footballs. Steel and aluminum panels in vehicles made since 1990 respond well to paintless dent repair. If the dented area has been repaired in the past or is not near the edge of a panel and if the paint has been broken or cracked, paintless dent repair may not be effective. A paintless dent repair technician analyzes the dent's location and depth. He or she accesses the dent through the window opening or by removing the trim pieces or the inner panel. With patience, the technician inserts metal rods or body picks behind the dented panel. Tabs or other tools used on the outside of the dent allow the technician to determine how much pressure to apply. The technician starts at the outer edge and slowly manipulates the metal until the dent disappears and blends into the painted panel. Paintless dent repair offers convenience and quality with minimal cost. Paintless dent repair does not use filler or paint and thus requires less material than traditional auto body techniques. It can also be performed within hours rather than days. The procedure requires minimal labor or overhead expense for the technician who can provide a specialized, mobile service to individual clients, auto dealers, auctions, rental car companies and auto clubs. Hire a certified and experienced paintless dent repair technician. Untrained technicians and do it yourself vehicle owners can cause additional physical and financial damage to the vehicle. Find a professional paintless dent repair technician by contacting local insurance agencies, auto dealers, car clubs or the Chamber of Commerce. Maintain the vehicle's original paint and value while restoring its physical condition when you hire a professional paintless dent repair technician.
