The wing design of an airplane is crucial for generating lift, which allows the plane to fly. Wings are shaped with an airfoil design, where the top surface is curved and the bottom is flatter, creating a pressure difference as air flows over and under them. This difference in pressure generates lift, enabling the aircraft to rise into the air. Additionally, the angle of attack, or the tilt of the wing relative to the oncoming airflow, further enhances lift until a critical point is reached.
To lift the plane and enable it to fly.
Yes, the design of a paper airplane cane help it to fly farther. The more aerodynamic the design, the better the plane will fly.
>No it cannot fly with one wing. UNLESS the aircraft's body actually produces sufficient lift, such as a "flying wing" aircraft
No. By definition, A PLANE is a fixed-wing aircraft. The wings are absolutely necessary for lift.
Yes. Wing shape affects flight. If the wing is more aerodynamic then a plane can fly more faster.
No matter its the same thing of an airfoil wing
You calculate the overall weight, wing area and engine power.
Using light-weight materials, an aerodynamic design, power source to get the plane off the ground will all help. Probably the biggest thing a plane needs is enough lift from the wings. The shape of the wing helps create this lift. The wing's profile kind of looks like a tear drop that is flat on the bottom and curved on the top tapering to a point to the rear of the wing. If I remember correctly, this profile creates an area of high pressure on the underside of the wing compared to a lower pressure on top of the wing. This is what creates the lift for the plane. Of course you have to maintain a proper speed to maintain this lift in order to keep the plane in the air...Hope that helps.
Because it is physically impossible.
They test it in the wind tunnel. If the design fails to pass the test they make an another design. By testing and testing they come up with the design at last.AnswerEngineers begin a wing design by identifying the purpose of the airplane and the speeds and weights that it will operate. An airplane that will fly slow may have a thick wing or a long & tapered wing. A fighter aircraft that will fly supersonic will have a thin wing and short and stubby. Then they adjust the shape of the wing to obtain the Lift and Drag and airflow that is needed for the design.
The shape of an airplane's wing is called the airfoil; this helps the plane to fly easily while in flight.
They assist by generating lift based on the plane's engine thrust,wing design,etc.The wings are specifically designed so that the pressure from the airplane's forward momentum builds up below the wing,thus generating lift and enabling the airplane to fly