The Boeing 737 typically takes off at a speed between 150 to 180 knots (about 173 to 207 mph or 278 to 333 km/h), depending on factors like its weight, configuration, and environmental conditions. Smaller variants, like the 737-700, may take off at lower speeds, while larger models, like the 737-900, might require higher speeds. The exact speed is determined during the pre-flight calculations by the flight crew.
It is very loud especially at the front of the plane on takeoff :)
The 737-800737-800 - Operating empty 41,145kg (90,710lb), max takeoff 70,535kg (155,500lb), high gross weight max takeoff 79,015kg (174,200lb).
150 mph
544 mph
A Boeing 737 typically uses between 1,800 to 2,500 pounds of fuel during takeoff, depending on the specific model, weight, and environmental conditions. This translates to approximately 270 to 370 gallons of jet fuel. Factors such as payload, weather, and runway length can affect fuel consumption during this phase.
590 mph
The fuel consumption of a Boeing 737 during takeoff varies depending on the specific model and load conditions, but it typically burns around 3,000 to 5,000 pounds (approximately 1,360 to 2,270 kilograms) of fuel during the takeoff phase. This amount can be influenced by factors such as aircraft weight, weather conditions, and engine type. Overall, takeoff fuel consumption represents a small fraction of the total fuel used for a flight.
100-280 kph.
737-238-3412
A Boeing 737 typically has a total of six tires: two on the nose gear and four on the main gear. The exact number may vary slightly depending on the specific model of the 737, but this configuration is standard for most variants. Each tire is designed to handle the aircraft's weight during takeoff, landing, and taxiing.
It's a measure of speed. (Like miles per hour (mph), or kilometers per hour (kph)). The Cessna 172 has a takeoff speed of about 55 knots (kts). A Boeing 737 has a takeoff speed of about 135-140 knots. On takeoff, aircraft need to reach a certain speed to get into the air.
A Boeing 737 typically burns around 2,500 to 3,000 pounds of fuel during takeoff, depending on factors such as the specific model, weight, and environmental conditions. This equates to approximately 1,200 to 1,400 liters of fuel. The fuel consumption can vary based on engine type and operational procedures. Overall, takeoff is one of the most fuel-intensive phases of flight.