The Concorde's Rolls-Royce/Snecma Olympus 593 engines consumed approximately 25,000 to 30,000 pounds of fuel per hour during cruise flight. This high fuel consumption was primarily due to the aircraft's supersonic speeds and the need for significant thrust. In comparison, this is much higher than that of subsonic commercial jets. The fuel efficiency was a trade-off for the speed and performance capabilities of the Concorde.
On average a Caterpillar Track Excavator 320 BL will consume about 10 gallons of fuel per hour. On an average eight hour workday, it will consume 80 gallons of fuel.
The amount of fuel needed to fire an engine depends on various factors, including the engine's type, size, and efficiency, as well as the duration and intensity of operation. For example, a small gasoline engine might consume about 0.5 to 1.5 gallons per hour, while larger diesel engines can consume several gallons per hour under load. To determine the exact fuel requirement, it's essential to consult the engine's specifications and operational guidelines.
The fuel consumption of a Caterpillar D3 98 is dependent upon the work load. Under a heavy workload, the engine will consume approximately 5 gallons per hour.
at 80% load approx 11 liters an hour
You can calculate fuel consumption per Kilowatt hour in diesel engine by multiplying the miles per gallon by the wattage per hour that the engine runs. This gives the net Kilowatt hour fuel consumption.
Depends on the size of the engine. 300 HP = 80 L an hour
The fuel consumption of a van idling for one hour typically ranges from 0.5 to 1 gallon, depending on the engine size, type, and efficiency. Smaller, more fuel-efficient vans may burn closer to 0.5 gallons, while larger or older models may consume up to 1 gallon or more. Factors like air conditioning use and engine condition can also affect idle fuel consumption.
On an average load on a 15 kc DG is about 4 littered of diesel per hour.
150 gallons per hour
The fuel consumption of a 12-71 Detroit Diesel engine typically ranges from 0.4 to 0.6 gallons per hour per horsepower, depending on the load and operating conditions. For example, at full load, it may consume around 6 to 8 gallons per hour. Actual consumption can vary based on factors such as engine tuning, maintenance, and specific application.
Airliner jet engines such as a Boeing 737 burns about 3,500 pounds of fuel per hour at cruising altitude and speed. Thats a little over 500 gallons per hour per engine.
The fuel consumption of a Caterpillar D7 bulldozer typically ranges from 6 to 10 gallons per hour, depending on the model, load, and operating conditions. Factors such as terrain, engine load, and the specific task being performed can significantly affect fuel usage. Always refer to the manufacturer's specifications for the most accurate information regarding a specific model.