winglett
The flaps are simply called flaps.
winglett
The flaps on a plane's wing are called "flaps." They are movable surfaces located on the trailing edge of the wings and are used to increase lift during takeoff and landing. By extending the flaps, the wing's surface area increases, allowing the aircraft to fly at slower speeds without stalling. There are different types of flaps, including plain, split, and Fowler flaps, each serving to enhance aerodynamic performance.
The trailing edge of the wing is the part that is referred to as the flaps.
circular
Flaps generally change the geometry of the wing for landing and take off speeds
Flaps in some cases are used to increase wing surface area. In most small single and multi-engine airplanes the flaps that are being utilitized usually plain, split or slotted, do not increase the surface area. They increase the camber (camber being the distance between the mean thickness of the wing and the line going from the leading edge to the trailing edge (called the chordline)), and also increase the coefficient of lift (or how hard the wing is working to produce lift). On most transport category airplanes they utilize what is called fowler flaps. These flaps increase the surface area of the wing by moving the flaps rearward on a track. This rearward movement increases those things stated earlier and also increased the surface area, which also produces more lift.
the wing flaps go up and down
. . . flaps!
An aircraft flap is simply called a "flap." Flaps are movable surfaces located on the wings of an aircraft. They are designed to change the shape and configuration of the wing during different phases of flight. By extending or retracting the flaps, pilots can adjust the lift and drag characteristics of the aircraft, allowing for changes in speed, angle of descent, and takeoff and landing capabilities. Flaps can be divided into several types, including: Plain Flaps: These are the simplest type of flaps, which extend straight down from the wing when deployed. Split Flaps: These flaps are divided into two sections, with the lower section extending downward and the upper section remaining in place. Slotted Flaps: Slotted flaps have a slot or gap between the wing and the flap, which helps to increase lift at lower speeds. Fowler Flaps: Fowler flaps extend backward and downward, increasing both the wing area and camber, which allows for greater lift generation. The specific type of flap used on an aircraft depends on its design and intended purpose. Flaps play a crucial role in controlling and maneuvering an aircraft, particularly during takeoff and landing.
The wing is the main flying surface. Control surfaces include the ailerons, flaps and slats.
To reduce the drag