Our cruise was not working, we took it to the dealer and he found the the cable on the throttle body was broken. It hooks to the left hand side on the top of the engine and runs to the controller on the driver side fender. If this doesn't work the wiring harness on the driver side fender my be broken.
Did you get the a RECALL notice ? Regarding the cruise control ... Ford put out a RECALL on the cruise control last year... I just had mines done on my 98 Ford Expedition XLT last week.
It shouldnt. The cruise control senses by the switch on the pedal not by the lights.
you can pull the two wire connector on the front of the master cylinder. this will dsable the cruise control. there is also a recall (fire hazard) on that connector as well.
Located in the brake pedal assembly
just changed motors in a Lexus es300 now the cruise control will not work everything is pluged in and moves freely the light on the dash will not light
It means that the cruise control is activated. Kenneth
Cruise control is an accessory.
It is possible to convert a car without cruise control to have cruise control. Many auto parts stores sell kits which will install cruise control in a vehicle.
There are several ways to fix the cruise control on your Mercedes-Benz depending on the problem with the cruise control. Make sure the fuse for the cruise control is not blown.
After some work on the vehicle such as replacement of the main vacuum system, when the cruise control is disabled during the work, it looses its communications with the main system. The only way to fix this is to have the programing uploaded to it by a ford dealer.
2004 sebring convertable cruise control not working - what to do?
There is no isolated fuse for the cruise control. It all runs off the 20A gauges fuse. If you are having trouble with the cruise control I would check the Cruise Control Module or the Cruise control Servo. What symptom is occurring?