0
02 escalade stalling when coming to a stop i have exhaust and cold air intake do i need a mass air?
If your 2002 Escalade is stalling when coming to a stop, it could be due to several factors, including issues with the mass air flow (MAF) sensor. Since you've added aftermarket exhaust and a cold air intake, it's possible that the MAF is not calibrated for the new airflow, leading to incorrect air-fuel mixture. Checking and possibly replacing the MAF sensor can help resolve the stalling issue. Additionally, ensure there are no vacuum leaks and that the throttle body is clean.
What else can I help you with?
Which is intake and exhaust?
Your exhaust lines up with exhaust pipes ,your intake lines up with your intake runners.
How do you find the intake and exhaust lifters on a engine?
The exhaust lifters will line up with the exhaust manifolds,Remove the valve cover if your working on a V8 and the valve that lines up with the exhaust port will be the exhaust valve,If it is a Chevy V8 they will be from standing in front of the car exhaust,intake,intake,exhaust,exhaust,intake,intake,exhaust.
Which valve is exhaust and which valve is intake on 94 GM 350ci?
look at the head with the valve cover off find where the exhaust manifold goes in tha is the exhaust valve or looking at the valves the first one is exhaust then intake then intake ,exhaust,exhaust,intake,intake,exhaust if you have the head off i think the intake valves are bigger than the exhaust
What describes the position of intake and exhaust valves during the most powerful stage in a four-cycle gas engine?
-intake: exhaust closed, intake open -compression: exhaust closed, intake closed -combustion: exhaust closed, intake closed -exhaust: exhaust open, intake closed
Why is there air coming out of the inlet manifold?
Air does not come out of an intake mainfold, because the intake manifolds are under a vacuum. Now exhaust manifolds, that a different story.
Which valves are the intake and exhaust on a 20r engine?
the intake are next to the carb and the exhaust are next to the exhaust manafold intake are .008 exhaust are .012 with the engine warm good luck
Where is EGR valve on 2000 Ford Explorer with 5.0 Liter engine?
back of the intake manifold, middleof the engine. lets gasses from exhaust back into the intake. will be a tube coming off it to the passenger side going to the exhaust manifold
Should the intake and exhaust valves be close when the?
Yes the intake and exhaust valves have to be close.
Why is Water disappearing and coming out of exhaust?
You need a head or intake gasket. Coolant is getting into engine. Head more likely.
Why is the exhaust valve bigger than the inlet valve?
The intake valve is always bigger than the exhaust valve because there is more volume going in to the cylinder than coming out.
How do you tell the differ beween the intake and the exhaust valve when adjusting on a350 engine 1988 corvette?
The intake valves are in the intake ports, the exhaust valves are in the exhaust ports.
How do identify the intake and exhaust valves with the heads on the car?
Trace the runners. You can see the exhaust runners leading to the exhaust valves, and the intake runners leading to the intake valves.
