0
When looking at the engine from the front, the EGR is a round-topped item being held to the intake manifold by two bolts. It is located right near the front on top of the engine, between the alternator and AC compressor. It should be underneath the throttle/cruise cables. It is easily removed by disconnecting the electrical connector and removing the two bolts with an extension and 10 MM deep well socket.
I myself have tried to clean my EGR before by spraying carb cleaner into it and even using a steel bristle brush. If that fixes the problem..good. If not, you may need to replace it.
What else can I help you with?
2007 fuel pump relay location 97 Chevy blazer?
Where is the location of fuel pump relay on 1996 Chevy Blazer?
Location of the MAP sensor on a 1991 Chevy Blazer?
where the map sensor on 98 blazer?
Where is the location of the heater motor in 1997 Chevy blazer?
Same as a 96 blazer go here.How_do_you_replace_the_blower_motor_on_a_1996_Chevy_blazer
Find fuse for power seat in a 96 Chevy blazer?
seat fuse location for 1996 blazer
Where is the location of a camshaft position sensor on a 1996 Chevy blazer?
It does not have 1
Location of inertia switch on a 2000 Chevy blazer?
A 2000 Chevy Blazer is a GM vehicle. Vehicles made by GM do not come equipped with an inertia switch.
Power seat relay location for Chevy blazer 1996?
In the fuse panel
Location of starter in 99 Chevy Blazer?
Passenger side bottom of engine.
The location of the ballast resister for the coil on a 89 Chevy Blazer?
None -inside the coil
1998 Chevy blazer 4x4 fuel pump location?
In the gas tank. Mo
Where is the location of the brake light switchon1997 Chevy blazer?
Directly above the brake pedal.
Will the doors from a 98 Chevy blazer fit a 2001 Chevy blazer?
Yes, the doors from a 98 Chevy Blazer will fit a 2001 Chevy Blazer with a little moderation.
