If you are referring to the "fuel tank pressure sensor", it is located on top of the Gas tank. The tank will need to be lowered or removed to access it.
TechJK ----------------------
The O2 sensor is in the rear exhaust maniford. It can be changed from above, but you'll need to use a mirror or work by braille.
behind the power steering pump
what is the oxygen sensor location on a 1993 oldsmobile cutlass ciera 3.3l v6
show location of camshaft position sensor for 2002 Oldsmobile bravada.
under the power steering pump in the top of the engine.
The oil pressure sensor on a 2001 Oldsmobile Silhouette is typically located on the engine block, near the oil filter. It may be positioned towards the back of the engine, making it somewhat difficult to access. To locate it more easily, you may need to look under the vehicle or remove any components obstructing your view. Always consult your vehicle’s service manual for precise details specific to your model.
The Fuel Tank Pressure Sensor on a Oldsmobile Bravada 2000 is on the top of the Fuel Pump Assembly.
The oil level light on your 1999 Oldsmobile Silhouette may stay on for several reasons, including low oil level, a faulty oil pressure sensor, or issues with the oil pump. First, check the oil level using the dipstick and add oil if it's low. If the oil level is adequate, the sensor could be malfunctioning, or there might be a problem with the oil pressure. It's advisable to have the vehicle checked by a mechanic to diagnose the issue accurately.
Under hood, center, rear engine area, mounted in exhaust manifold
On a 2003 Oldsmobile Silhouette, the heated oxygen sensor (HO2S) bank 1 sensor 1 is located in the exhaust system, specifically upstream of the catalytic converter. It is typically found on the exhaust manifold or in the front pipe leading to the catalytic converter. This sensor monitors the oxygen levels in the exhaust gases to help regulate the engine's air-fuel mixture.
To change the crankshaft position sensor on a 1999 Oldsmobile Silhouette, first disconnect the negative battery cable to ensure safety. Locate the sensor, which is typically found near the crankshaft pulley; remove any components obstructing access. Disconnect the electrical connector and unscrew the sensor from its mounting position. Install the new sensor by reversing the steps, ensuring it is securely fastened and reconnected before reconnecting the battery.
They are in the exhaust flow