Either take out the bulbs or remove the fuse for the DRL's.
You should note that if you are in Canada, the Daytime Running Lights are MANDATORY on all vehicles sold in Canada since 1990, and disabling them may cost you a LOT of money in fines, as it is against Federal law, and the Highway Traffic Acts of most Provinces.
To disable the running lights either unplug the relay to the fuse box. Also there is a fuse for this in the fuse box remove this and that will disable the lights.
To disable the daytime running lights on a 2007 Crown Victoria, you can locate the fuse in the fuse box under the dashboard on the driver's side. Look for a fuse labeled "DRL" or "Daytime Running Lights." Removing this fuse will disable the daytime running lights. Always consult the vehicle's owner manual for specific details and fuse diagrams.
The daylight running lights of a Ford Explorer can be turned off by using the manual headlight control switch. Place the switch in the middle position to turn the daytime running lights off. The headlights will then need to be turned on manually at dusk.
Remove the fuse.
Press a button.
Our daytime running lights just stopped working on our 2007 Toyota rav4 bulbs???
How do you disable the DRLs on a 2005 Mitsubishi Endeavor?
Try a hammer.
slightly apply the E brake
To disable the daytime running lights on a 2008 Sequoia, turn the head light switch to the center position. It should show two headlights, one with an 'X' and a line between the two.
If the Explorer is running engaging the parking brake is supposed to turn the daytime running lights off , otherwise the daytime running lights are supposed to shut off when the engine is shut off . I have a 2004, Eddie Bauer Explorer. On the light switch itself, there is a selection to turn on or off the day lights, as well as the extended, courtesy lights after ignition is turned off.
To disable the daytime running lights (DRL) on a 1997 Ford Explorer, locate the DRL relay under the dashboard or in the fuse box. You can either remove the relay or disconnect the wiring associated with it. Alternatively, you can also check the fuse for the DRL and remove it, but be aware that this may affect other lighting systems. Always consult your owner's manual for specific instructions related to your model.