answersLogoWhite

0

turn mixture screws all the way in till seated. do not overtighten back both scres out 3 and quarter turns. start at that point then fine tune with engine running

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How do you do the shootist mossion?

When you start the mission activate a weapon cheat (any one) and if done right it will give you more time in the rounds


How do you adjust the valve clearance on r2 engine?

Hi i have a r2 motor and it got hot and then wouldnt start so i replaced the water pump as it was broke and now it wont start it winds and theres spark but wont start


How can i train my budgies?

set rounds to start training


How do you start single phase induction motor?

capacitive start motors start by themselves however a normal single phase induction motor requires a starter motor to 'kick-start' the motor into action.


Start automatic car without starter motor?

Might try putting an air gun on the crank pulley nut but not recommended. Best to replace the starter motor and do it right


My Yamaha blaster wont start in cold?

That's a fairly common problem with that 200cc motor. The blaster motor does not preform well when it's cold. One way to help starts adjust idle up just alittle use full chock when it start let warm up with 1/2 chock on.


How can I adjust the water temperature in the shower?

To adjust the water temperature in the shower, you can typically turn the handle or knob to the left for hotter water and to the right for colder water. Start by turning the handle slowly to find the desired temperature.


Why do the lights dip at 5 second intervals?

This condition could happen if there is a motor trying to start on the circuit. A water pump motor will do this if the pressure switch is not working properly. Switch is calling for motor to start. Motor starts and switch shuts the pump off right away. pressure instantaneously drops and pump tries to start again. This cycling will continue until the pump's overloads drop the pump off line.


The function of a start winding in a split-phase motor is to?

a start winding on a motor is used to add torque to start a motor, and more importantly to establish the direction that the motor will turn. to reverse a motor normally means to reverse the start winding. the run winding will work the same in either direction, the start winding determines the direction.


Why is motor start analysis performed?

Motor acceleration evaluation assist to offer as one of the approach of beginning, right motor capability, and right device layout for minimizing the effect of the motor beginning at the device Motor start analysis may be executed via skilled engineers in each static and dynamic simulations primarily based totally at the operational capability of your precise device. Each of those strategies have their personal conveniences, and figuring out the way to continue is primarily based totally in your particular motor because the enjoy and know-how of our engineers consulting at the project.


How does vehicle start?

it start by starter motor


How do you change military time to regular time on g shock?

To change military time (24-hour time) to civilian time (12 x 2), you must press the lower right 'start' button simultaniously with the 'adjust' button in the upper-left.