Technician A is correct. A twelve point wrench is used to loosen bolts that are very tight.
To adjust the truss rod on your guitar to tighten or loosen the neck, use an appropriate tool to turn the truss rod nut clockwise to tighten the neck or counterclockwise to loosen it. Make small adjustments and check the neck's straightness by looking down the fretboard. If unsure, consult a professional guitar technician for help.
To replace it remove the battery terminal so you will not have power. Loosen the bolts (use liquid wrench or wd40 for this will be rusty) exhaust pipe from the exhaust manifold (driver side) and then you need to loosen the exhaust pipe from the exhaust manifold to the part where it connect exhaust pipe from the other side of the exhaust manifold (passenger side) and then you need to loosen the electrical wire from the starter and then loosen the bolts that connect the starter now you can wiggle the starter to pull it out you need to try to figure out how to get it through the loosen exhaust pipe ( but it should come out)
how to loosen a tight nut
Loosen' Control was created in 2000.
Loosen My Strings was created in 1996.
If it is a plug loosen counterclockwise If it is a petcock loosen clockwise
loosen the bolt in the center of the drive belt pulley, then loosen the bolt on the side of the pulley. as you loosen the side bolt the tension lets up
What side do I turn the tensioner to loosen it?
how do I loosen and adjust altinator
No, you do not have to loosen the girth before mounting a horse.
Loosen the pulley first and then the belt should loosen off the tracks., follow the diagram on the hood
The present tense of loosen is:I/You/We/They loosen.He/She/It loosens.The present participle is loosening.