0
To change the transfer case on a 1996 Land Rover Discovery, first ensure the vehicle is securely raised and supported. Drain the transfer case fluid, then disconnect the driveshafts from the transfer case, followed by unbolting the transfer case from the transmission and engine using the appropriate socket and wrench sizes. Carefully remove the transfer case and replace it with the new unit, ensuring all bolt patterns align. Reattach the driveshafts, refill the transfer case with the correct fluid, and check for leaks before lowering the vehicle.
What else can I help you with?
How do you change the oil in the transfer case?
Click on the link to the right for instructions.
How do you change a timing belt on a 1989 Plymouth Reliant?
Help...can anyone point me in the direction of a diagram or instructions? online?
1996 Land Rover discovery fuse and relay diagram?
when you change the fues and relay switches and the truck dont start what to do next.
How do you change transfer box oil on a discovery 3?
To change the transfer box oil on a Discovery 3, first ensure the vehicle is on a level surface and safely supported. Remove the drain plug from the transfer case and allow the old oil to fully drain out. Once drained, replace the drain plug and then remove the fill plug. Pour in the new transfer box oil until it reaches the fill level, then reattach the fill plug securely. Always consult the vehicle's manual for the correct oil type and specifications.
Inner tie rod front end on a delta 88 1988?
i would like a diagram and instructions on how to change inner tierods for a delta 88 1988
How can the pressure volume diagram be used to analyze the thermodynamic processes of a system?
The pressure-volume diagram can be used to analyze the thermodynamic processes of a system by showing how pressure and volume change during different stages of the process. This diagram helps in understanding the work done, heat transfer, and efficiency of the system.
How do you change front swivel joints on a discovery td5?
how do you change a ball joint on a td5 discovery
How do you change a John deere la 175 mower deck belt configuration.is there a diagram?
You can change a John Deere LA 175 mower deck belt configuration by checking the diagrams and instructions in the owner's or manufacturer's manual basically.
Where can I get instructions preferable with diagram of how to change a 1999 1.4 Daewoo Lanos cam belt?
You need a workshop service Manual Email me on trobson@fsc-itps.co.uk and i will tell you how to obtain one
Diagram to change front speed sensor in transfer case on 1998 for explorer?
my 4 high and 4 low is blinki ng and wont let me go in 4 weel driv
Where can you find a diagram to change the serpentine belt on a 1998 Ford Escort ZX2 6-cylinder 2.0?
Number one. The ZX2 only has a 4 cyl, which is the 2.0. Number 2, Go to www.zx2racing.com, there will be detailed instructions. On the left hand collum, click Pully Diagram.
Diagram to change serpetine belt?
show me a diagram of how to change my serpetine belt on my 96 olds LSType your answer here...
