To adjust the clutch in a 1991 Ford Laser KF, first, locate the clutch cable under the dashboard near the clutch pedal. Ensure the vehicle is in neutral, then check the cable tension; it should have about 10-15 mm of free play at the pedal. If adjustment is needed, loosen the lock nut and turn the adjusting nut to achieve the correct tension, then retighten the lock nut. Finally, test the clutch engagement and make further adjustments if necessary.
There is no way 2 adjust the clutch. The only way is 2 replace them. Clutch & pressure plate & throw out bearing, replace them all in one shot!!
It has a hydraulic clutch system
To adjust a clutch you fire three rounds at the gas tank. Then you throw a lit match into your 240sx's upholstery. For best results, climb under the car at this point. Have a friend nearby to collect the remnants of the clutch and gearbox. Careful, it will be hot.
Should be on the upper end of the clutch pedal under dash area
the clutch is not adjustable but you can take up some pedal free-play by going under the dash and locating the adjustable rod going from the clutch pedal to the master cyl
85-91 nm or 63-67ft.lbs
put it in neutral then try to start it.
it is atf fluid
Depends on what exactly is wrong with it :) Unless it is about simply replacing or adjusting the clutch cable, replacing the clutch involves removing transmission out, which means taking the axles out etc.
should have spring loaded tensioner nonadjustable
To adjust the manual clutch on a 1991 Dodge Colt, first, locate the clutch cable near the firewall. You can adjust the tension by turning the adjustment nut on the cable; turning it clockwise increases tension, while counterclockwise decreases it. Ensure there's about 1/2 inch of free play at the pedal before it engages. After adjusting, test the clutch operation by pressing the pedal to ensure smooth engagement and disengagement.
you may need a new clutch or there may me some sort of sensor or switch that is bad