answersLogoWhite

0

A bad ground wire is the most common cause of turn signals and brake lights not working. The ground wire connection might be corroded.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

Brake light and Honda civic wont come outof park?

You may have to depress the break pedal. Don't quite understand "brake light not coming out of park" ... brake lights are non-moveable item .. please be more specific.


What would cause the headlight motor instrument panel lights and fog lights to all quite working at the same time on my 99 corvette?

bad headlight switch


The instrument panel and both rear lights seemed to have stopped working on your 96 mondeo i have replaced all the relays and the fuses are all intact and working?

The fault is in the switch itself, quite common on this age of car, the dash lights and rear lights are worked off the same contacts on the back of the switch, replacement is the usual answer,


Why is '97 sunfire abs and brake light on?

In my case, the brake (RED), ABS (Yellow) and Traction Control (Yellow) lights are on. The garage chescked it out and the brakes are perfect. Only one of the brake light (back) was burnt.... The User's guide says to stop driving and get the car towed it the "brake indicator" (RED) is on. Paying a towing for a burnt light does not quite make sense, does it?


My Auto headlight quite working when i released my parking brake the daytime running lights came on at sunset it switch to the headlight by itself now have to turn headlights on manually?

theres a fuse under the hood in the fuse box theres a relay (its small rectangled gray) labled athdl or similar... meaning autoheadlamp replace it... PS if you want your daytime driving lights to quit working just pull the dlr relay and put it in the autoheadlamp hole.... this will not hurt your vehicle at all it will only save your headlamp bulb some hours


How do you change a front driver side blinker for a 1995 Geo Metro?

if the bad blinker is the small, rectangular one in the gray bumper, all you need to do is get a Phillip's head screwdriver, remove both screws from the front blinker, remove the orange plastic cover, and then the bulb actually pops out itself with a quick wiggle. easy as pie, and the replacement bulb is quite cheap as well.


Where is the relay for 4 way flashers on 1995 Chevy Tahoe?

On the junction panel on the firewall just above and left of the brake pedal. You can see it quite easily, pulls out. Replace with exact part or lights flash at the wrong rate.


Your 2000 Saturn LS1 has recently had problems with the right turn singal shutting off the night lights when you apply it and kno it works but you have no night lights or high beams.?

The 2000 LS1, being the first year of the L-series, has had quite a few minor problems like that. That is caused by some of the wiring being chafed, and Saturn issued a recall in 2003 to fix this, and a few other problems with the car. The problem with the lights and blinker usually only occurs if you live in a humid area.


How do you change a Chevy Colorado brake light switch?

The Chevrolet Colorado brake light switch is quite simple to change. The brake light switch simply plugs in and out.


If one brake cylinder brakes can it be fixed?

Broken brake hydraulics can not be repaired but ( and imagine this is correct) If it has failed it is quite possible that it may be rebuilt. In north America there is quite a few re builders that repair these.


How do you install brake pads on 1982 cutlass?

Replacing the brake pads on your 1982 Oldsmobile Cutlass is quite easy. Remove the brake pad Springs and caliper. The brake pads will come off. Reverse the process to install the new brake pads


What are the release dates for Lights Out - 1946 Mary Mary Quite Contrary 2-29?

Lights Out - 1946 Mary Mary Quite Contrary 2-29 was released on: USA: 27 March 1950