how to remove broken dipstick tube ford winstar
Through dipstick tube.
If the dipstick has broken off into the tube on a Nissan Altima, you can remove it using pliers. Other people have had luck using industrial strength vacuums and sucking the broken dipstick up.
Cut the dipstick tube with a tubing cutter below broken dipstick and remove Use rubber tubing and hose clamps to reattach tube pieces
If auto - through the dipstick tube If std. - through the plug at side of transmission
Cut the tube with a tubing cutter- remove dipstick and use rubber tubing and hose clamps to reassemble dipstick tube what up.
Where do I find the dipstick tube? Through the dipstick tube
can you see any of the stick? or is it down inside the tube? dave tradertaippan@yahoo.com Drain oil, remove lower sump pan,drift out broken dipstick tube & replace with new tube.
A friend who works at ford told me if the dip stick tube is broke at the block like mine is, screw a screw into the block where the tube is broken just enough to get something to grip and pull out the broken part. The tube is held in by an o ring and should pop out the pop the new one in.
You would probably have to follow the dipstick tube to where it meets the engine, remove the bracket bolt and either remove the tube or lift it up to push the dipstick up or out of the tube.
The oil dipstick tube comes out of the block on the driver's side.
dipstick tube