The 1991 351 Windsor is electronically fuel injected, so changing the engine would require all of the control modules and fuel injection systems associated with an EFI engine to be put in as well, but it is possible.
I believe the tank size is 32 gallons.
10 degrees BTDC ( unless the engine compartment decal shows different )
Yes, a C6 transmission from a 1984 Ford Bronco can be bolted into a 1990 Bronco, but there are some considerations. The C6 is compatible with both the 351W and 302 engines, but you may need to address differences in the transmission mounts, driveshaft length, and possibly the transmission cooler lines. Additionally, ensure that the bellhousing and torque converter are suitable for the engine in the 1990 Bronco. Always consult a professional for a proper fit and compatibility check.
I believe that is 10 degrees BTDC
Motorcraft ( CM 4764 ) according to motorcraft . com ( no spaces ) new fuel pressure regulator for a 1988 Ford Bronco 351 cubic inch
Type your answer here... no mass air flow in bronco came out in 94 1988 should have map
most 1992 Eddie Bauer bronco's are 3.55 in the rear and 3.54 in the front. that's what mine is with a 351w (5.8).
on an 87 bronco with a 351w (5.8) its on the drivers side right above the oil filter.
how to static time a ford 351w
351w=5,752cc
163 HP
a complete donor truck