0
No, a 5.7 spider intake manifold is not directly compatible with a 5.3 Vortec engine due to differences in design and bolt patterns. The 5.3 Vortec typically has a different intake port shape and alignment compared to the 5.7. However, with modifications and the right adapter plates, it may be possible to make them work together, but it's not a straightforward swap. Always consult an expert or do thorough research before proceeding with such modifications.
What else can I help you with?
Will the lsx intake manifold fit your vortec tbi 5.3?
no such thing as a vortec 5.3 tbi
Will the intake manifold off vortec 5.7 fit a 305?
It will as long as the 305 is a VORTEC ENGINE TOO.
Will a 1998 vortec 305 motors' intake manifold fit a 1997 350 vortec motor?
Yes they are the same.
Will an intake manifold from an older 350 fit on a 350 with vortec heads?
No it will not, Totaley different.
Can you put 1997 350 vortec heads and intake on a 1980 350?
yes they will fit, but you will need an intake manifold compatible with vortec heads if you plan on reusing the carburetor
Will regular old style 305 heads work on a newer vortec 305 block?
The heads will fit the block, but the vortec intake manifold will not bolt to the old style heads.
Will a ls1 intake manifold fit on a 5.3 vortec motor?
yes, just need to change the fuel cross over line cause it wont fit
Will 1995 Chevrolet 350 intake fit a 1997 vortec heads?
will 1995 Chevrolet 350 intake fit a 1997 vortec heads
Will the heads off a 97 vortec fit of a 88 350 block?
Yes, they will fit, and increase torque by a good amount. However, the Vortec heads used a vertical intake bolt design, so you will not be able to use your intake manifold. Side note on the vertical intake bolts, you also need to get Vortec specific intake bolts, because they bottom out in the heads to stop from overtightening and seal better. All in all, vortecs are a good purchase, if you have the money for a new intake manifold. Edelbrock makes some great ones specifically for vortec heads on older engines. look into it. hope i could help.
Will an intake from a 93 350 throttle body chev fit on a 99 7.4l vortec block?
No, a throttle body intake from a 1993 Chevrolet 350 will not fit directly onto a 1999 7.4L Vortec block. The 7.4L Vortec has a different bolt pattern and design, as it is part of a different engine family with a more advanced intake manifold system. Additionally, the Vortec engines typically use a different style of fuel injection and require specific intake manifolds designed for their configuration. Thus, modifications or an adapter may be necessary for compatibility.
What car exhaust manifold will fit a 350 vortec?
A 5.76 car exhaust manifold will fit a 1997 350 Vortec. Your local auto parts store or car dealership will be able to give you a detailed list of all car exhaust manifolds that will fit.
Can you use 350 intake on 5.7 vortec engine?
Yes, you can use a 350 intake manifold on a 5.7 Vortec engine, but it requires some modifications. The Vortec engine has a different port design and requires an adapter or specific intake designed for Vortec heads to ensure proper fit and performance. Additionally, be mindful of compatibility with other components, such as the throttle body and fuel injection system. It's always best to consult with a performance specialist or mechanic for the best results.
