Yes, a bad coil pack can cause an engine to sputter. The coil pack is responsible for providing the spark needed for combustion in the engine's cylinders. If it fails or malfunctions, it can lead to inconsistent spark delivery, resulting in misfires, rough idling, and sputtering during acceleration. Addressing a faulty coil pack can help restore proper engine performance.
Bad ignition coil will cause engine to sputter and hesitate on acceleration.
were about on the engine is the coil pack for a renuault 1.4 16 vaule
Bad coil pack or spark plugs...
Most automobiles will not start with a nonfunctioning coil pack. The coil pack will cause the spark plugs not to fire.
The coil pack, on a 1996 Chevrolet Cavalier, is located on the top of the engine. The coil pack is near the electronic spark distributor.
Where is the coil pack located on a 1998 Chevy Malibu with 2.4 engine
Wiring and internal engine problems can cause misfires.
Then there is a no spark condition and engine will not run. If it has more than one coil pack it will miss on the cylinders controlled by the defective coil pack.
Bad Plug or coil pack.
In this order....one at a time cheapest on up...>>>Spark Plugs > Plug Wires > Coil Pack> Fuel Regulator> Fuel Pump.
To change the coil pack on a 2002 Crown Victoria, start by disconnecting the negative battery terminal to ensure safety. Remove the engine cover if necessary, then locate the coil pack on the engine. Unplug the electrical connector from the coil pack, remove the mounting bolts, and carefully pull the coil pack out. Install the new coil pack by reversing the steps: position it, secure it with bolts, reconnect the electrical connector, and replace the engine cover before reconnecting the battery.
To replace a coil pack on a 2002 Ford Focus, first ensure the engine is off and cool, then disconnect the negative battery terminal. Remove the engine cover if necessary, and locate the coil pack on top of the engine. Unplug the electrical connector from the coil pack, unscrew the mounting bolts, and then carefully pull the old coil pack out. Install the new coil pack by reversing the steps: secure it with bolts, reconnect the electrical connector, and finally reattach the battery terminal.