To change the coil pack on a 2002 Crown Victoria, start by disconnecting the negative battery terminal to ensure safety. Remove the engine cover if necessary, then locate the coil pack on the engine. Unplug the electrical connector from the coil pack, remove the mounting bolts, and carefully pull the coil pack out. Install the new coil pack by reversing the steps: position it, secure it with bolts, reconnect the electrical connector, and replace the engine cover before reconnecting the battery.
The Coil On Plug ignition system uses ( 8 ) individual coils on the 8 spark plugs on your 2002 Ford Crown Victoria firewall 4 - 8 3 - 7 2 - 6 1 - 5 front of Crown Victoria
There are no wires to change - coil over plug. To change the plugs unscrew the old ones. put the new ones in their place. Torque to spec.
C.O.P ( coil on plug ) they are under there. Just remove the coil.
You should have C.O.P. ( coil on plug ) The plugs are under the coils.
Remove the coil on top of the plug, then just remove the plug.
Remove the coil on top of the plug. There's the spark plug.
8 -------------------------------------------------------------------- If you have a 1998 or newer Ford Crown Victoria that has the Coil On Plug ( C.O.P.) ignition system there are ( 8 ignition coils ) as mentioned above Before that the 4.6 liter in a Ford Crown Victoria had ( 2 coil packs )
If you have C.O.P ( coil on plug ) then the plugs are under there. Just remove the coil, pull the plug cap off and there you go.
Yes.
Do you have C.O.P. ( coil on plug ) If so, under the coil.
If your car has a distributor it is the negative on the coil.
Have you checked the coil to start with ?