0
What else can I help you with?
How do you change a tensioner belt?
We need to know the year, make, model and engine size of the vehicle then we need to know if you want to change the belt tensioner or the belt or both.
How do you replace a serpentine belt on a 2003 Toyota sequioa?
make sure you have a diagram, use a long box end wrench to torque the tensioner which is near the top. When you rotate the bolt head, it will relax the tensioner. Remove the belt and then replace around all components except the tensioner. Push on the tensioner wrench again to make room for the belt to go over tensioner.
How can I adjust a belt properly?
To adjust a belt properly, first locate the belt tensioner and use a wrench to loosen it. Then, adjust the belt tension by moving the tensioner until the belt has the right amount of tension. Finally, tighten the tensioner back up and make sure the belt is aligned properly on the pulleys.
How do you change AC belt on 2001 KIA Sportage?
Loosen the tensioner pulley. The tensioner pulley will make the belt loose. The belt can easily come off. Reverse the process to put on a new belt.
How do you loosen serpentine belt tensioner on 93 Chevy silverado?
To loosen the serpentine belt tensioner on a 1993 Chevy Silverado, you'll need to use a wrench or ratchet on the tensioner bolt. Turn the tensioner counterclockwise to relieve tension on the belt. Once the tension is relieved, you can remove the serpentine belt from the pulleys. Make sure to note the belt routing for reinstallation.
How do you replace a water pump belt on a 1995 Chevy Camaro?
All you need to do is put a wrench on the belt tensioner and move it in the direction that relieves the tension. This will make it possible to remove and install the old and new belt.
Car make squealing sound when start engine and when ac is on?
Worn serpentine belt and/or belt tensioner.
You just changed the alternator on a 90 LSC you are having trouble getting the belt tensioner back on Is there a trick?
im going on the assumption that you are referring to the belt back on the tensioner cause there is no reason to remove the tensioner to install an alt. if it is a matter of putting the belt on, make sure that the belt is routed correctly through the pulleys. then remove the belt off the alternator, put the belt on the tensioner THEN pull the tensioner back with a wrench on the tensoiner adjusting nut. slip the belt on the alternator and slowly release the wrench. i hope this was helpful
How do you replace Ford lightning belt?
Disconnect the battery. Rotate the belt tensioner to release the belt. Have a helper remove the belt while holding the tensioner. Replace the belt, putting the new one on over the pulleys in the same direction. The tensioner can now be released.
What all do you have to do to change a serpentine belt on a 1992 Chevrolet G20 van?
Find the belt tensioner and using a socket and ratchet move the tensioner wheel and arm upwards just enough to slip the belt out from under the tensioner wheel. Make note of routing pattern for old belt so new belt can be installed exactly the same.
Can a timing belt tensioner make a noise?
Yes, a timing belt tensioner can make noise if it is worn out or malfunctioning. Common sounds include rattling, squeaking, or grinding, which may indicate that the tensioner is not maintaining proper tension on the timing belt. If left unchecked, a noisy tensioner can lead to belt slippage or damage, potentially causing engine performance issues. It's advisable to have it inspected and replaced if necessary to prevent further problems.
How do you put on a serpentine belt a 2005 Ford 500?
The belt has a spring loaded tensioner. The tensioner can be pulled to the side to release the belt then the belt can be removed. Make sure to put the new belt over all of the pulleys the same way that the old one was positioned.
