No. They intake and heads need removed.
no.
no, u need to remove the heads to get at the lifters
It's not recommended to change just the lifters. The cam and lifters should be replaced together. To get at the lifters, you can remove the rocker covers and intake manifold, loosen the rockers enough to get the pushrods out, then pull out the lifters.
the distbutor rotor plug is on the right side of the motor under the intake. there are two bolts to take off the cap to get to the rotor plug. it is hard to get to without removing the intake.
this is a big job , pull off intake manifold and the heads to get to the lifters , and when you put it back together adjust your valves . if not done correctly you could ruin engine.
under the intake manifold.
They all had hydraulic lifters. To determine if it has roller lifters, you'd probably need to take off the intake manifold and have a look.
i dont think they do, the lifters are right under the intake manifold
They are under the intake manifold.
The exhaust lifters will line up with the exhaust manifolds,Remove the valve cover if your working on a V8 and the valve that lines up with the exhaust port will be the exhaust valve,If it is a Chevy V8 they will be from standing in front of the car exhaust,intake,intake,exhaust,exhaust,intake,intake,exhaust.
No, just pull the intake manifold, thenfish the lifters out.
To replace the valve lifters on a Cavalier, remove the intake manifold, valve covers and rocker arms. Remove the heads of the lifters using needle-nose pliers.